Alaska Airlines Orders Five More Boeing 787s, Plans Seattle Dreamliner Base

Aviation Expert Richard Godfrey Attributes AI 171 Crash to RAT Deployment, Rules Out Pilot Error Aviation expert Richard Godfrey has identified the automatic deployment of the Ram Air Turbine (RAT) as the primary cause of the Air India Flight 171 crash in Ahmedabad on June 12, dismissing widespread speculation that pilot error was to blame. In an interview with Geoffrey Thomas, Godfrey examined preliminary findings and data released by the Air Accident Investigation Bureau (AAIB) a month after the London-bound aircraft crashed, resulting in the deaths of all but one passenger. Timeline and Key Findings The AAIB’s preliminary report outlines a rapid sequence of events on the day of the crash. At 1:13 pm, the aircraft requested pushback and startup clearance, followed by Air Traffic Control (ATC) confirming the need for the full length of Runway 23 at 1:19 pm. Taxi clearance was granted at 1:25 pm, and by 1:33 pm, AI 171 was instructed to line up for takeoff. The flight was cleared for takeoff at 1:37 pm, but just two minutes after liftoff, the pilots issued a MAYDAY call before the aircraft crashed seconds later. The report highlights that both engines shut down within one second of each other after the fuel supply was cut off. Cockpit voice recordings captured one pilot questioning the other about the engine shutdown, with the second pilot denying any action to cut the engines. Examination of the engines recovered from the crash site revealed they were in the “Run” position, and attempts had been made to relight them. RAT Deployment and Technical Analysis Godfrey’s detailed analysis, drawing on the preliminary report, flight data, and airport CCTV footage, revealed that the RAT was automatically deployed at approximately 1:38:47 pm. According to the data, both engines’ N2 values dropped below minimum idle speed at this time, triggering the RAT hydraulic pump to supply hydraulic power. The preliminary report included an image showing the RAT in its extended position but did not clarify the timing or cause of its deployment. By synchronizing multiple data sources—including the flight data recorder (FDR) and ATC logs—Godfrey established that the RAT deployment occurred mere seconds before the crash. This timing strongly suggests a technical malfunction rather than any human intervention. Conflicting Interpretations and Ongoing Investigation Despite Godfrey’s findings, the investigation has been marked by conflicting interpretations. Some experts, including Captain Byron Bailey, have proposed the possibility of deliberate pilot action, even suggesting “suicide by the pilot” as a theory. However, Godfrey’s analysis, supported by the available data, firmly disputes this notion, attributing the crash to a technical failure centered on the RAT deployment. In response to the incident, the U.S. Federal Aviation Administration (FAA) and Boeing reviewed the safety of fuel cutoff switch locks, which had come under scrutiny during the investigation. Both organizations have since affirmed the safety of these components. The investigation into the AI 171 crash remains ongoing, with authorities yet to issue a definitive conclusion. For now, Godfrey’s assessment shifts the focus away from pilot error, underscoring the critical role of the RAT deployment in the tragic sequence of events.

Innovation and Aerodynamics in the Design of the Avro Vulcan’s Wing The Avro Vulcan, colloquially known as the “Tin Triangle,” was far more than a mere delta-wing bomber. Its distinctive shape concealed a host of aerodynamic innovations, rigorous experimentation, and technical refinements that distinguished it during Britain’s postwar advancement of strategic bombers. As a key component of the V-bomber force, the Vulcan embodied a significant leap in aerodynamic science, driven by the pressing Cold War demands for speed, altitude, and survivability. Dr. Steve Liddle, Vulcan to the Sky Trustee and Principal Aerodynamicist at Visa Cash App RB F1 Team, has revisited this critical period in British aviation history through detailed technical reflections. His insights draw upon rare archival materials, including declassified research from the Royal Aircraft Establishment (RAE) at Farnborough during the early 1950s. Pushing the Boundaries of Aerodynamics The Vulcan’s design was fundamentally shaped by the need to surpass and evade increasingly sophisticated enemy defenses. Achieving the required high speeds and altitudes necessitated an unprecedented level of aerodynamic sophistication in bomber design. A central challenge was managing airflow at high subsonic and transonic speeds. Early flight tests involving the Avro 707 and Vulcan prototypes revealed severe buffet caused by shock-induced flow separation, a phenomenon where the wing abruptly lost lift as airflow broke down. To overcome this, engineers at the RAE undertook extensive wind tunnel testing, culminating in the publication of Technical Memoranda 441 in 1955. Under the leadership of aerodynamicist Ken Newby, the research focused on modifications to the Vulcan’s wing leading edge. Three designs were evaluated: a short extension, a long extension, and a curved long extension. The long extension, based on the RAE 101 airfoil, emerged as the most effective, facilitating efficient supersonic airflow expansion and pushing the buffet boundary further back. These refinements, combined with the addition of vortex generators positioned at 25% chord to energize airflow, were ultimately incorporated into production aircraft. Innovation Amid Complexity and Risk The rapid pace of the Vulcan’s development meant that some aircraft were constructed before aerodynamic refinements were fully finalized, reflecting both the urgency and confidence in ongoing research. However, integrating advanced aerodynamic features introduced considerable complexity. Balancing structural integrity and performance while adopting novel solutions presented significant technical risks, and the process was not without controversy. Certain aerodynamic innovations, such as vortex generators, were even tested in flight prior to wind tunnel validation—an approach that would be considered highly unconventional in today’s risk-averse engineering environment. Reactions within the market to such innovation were mixed. While some stakeholders acknowledged the potential for enhanced efficiency and performance, others voiced concerns over increased costs and technical uncertainties. The experiences of contemporaries underscored these risks: for instance, the Gloster Javelin, a Vulcan contemporary, suffered from poor transonic performance due to a less advanced wing design. More recently, companies like Lockheed Martin have encountered significant losses linked to design challenges and performance issues in cutting-edge aviation projects, illustrating the persistent tension between innovation and risk. A Lasting Legacy Despite these challenges, the Vulcan’s refined wing design and buried engines delivered a distinct aerodynamic advantage, ensuring stable and efficient airflow at high speeds. The aircraft’s enduring legacy stands as a testament to the boldness and ingenuity of its designers—engineers who skillfully balanced innovation, risk, and performance to create one of the most iconic bombers of the jet age.

Air France-KLM Revises Airbus A350 Orders, Prioritizes A350-900 Over A350-1000 Air France-KLM is adjusting its widebody fleet strategy by converting a significant portion of its Airbus A350-1000 orders to the smaller A350-900 model, according to the latest data from Airbus’ order backlog. Initially, the Franco-Dutch airline group placed an order in 2023 for 50 A350 aircraft, consisting of 39 A350-900s and 11 A350-1000s. The recent revision involves converting eight of the A350-1000 orders into A350-900s. This strategic shift, first reported by FlightGlobal, comes two years after the original purchase and reflects a broader industry trend favoring more efficient and flexible aircraft. Strategic Shift Toward Efficiency and Range Air France-KLM’s decision highlights a preference for smaller-capacity aircraft with extended range capabilities. The A350-900 typically accommodates between 332 and 352 passengers in a three-class configuration and can operate nonstop for up to 9,700 nautical miles (18,000 kilometers). This makes it well-suited for a diverse range of routes, from short-haul to ultra-long-haul. In comparison, the larger A350-1000 seats between 375 and 400 passengers and offers approximately 40% more premium seating, but with a slightly reduced maximum range of 8,000 nautical miles. Currently, Air France operates a fleet of 39 A350-900s, with an average aircraft age of 2.8 years. These aircraft are configured to carry 324 passengers, divided into 34 business class, 24 premium economy, and 266 economy seats. In preparation for KLM’s planned introduction of the A350 between 2026 and 2027, KLM pilots are undergoing training on Air France’s A350s as part of a pilot-sharing arrangement within the group. Fleet Renewal and Environmental Objectives The incoming A350s are intended to replace aging Airbus A330s and Boeing 777s across both Air France and KLM. Air France’s current widebody fleet includes 10 A330-200s with an average age of 22.6 years, alongside 62 Boeing 777s. KLM operates 11 A330s and 31 Boeing 777s. Benjamin Smith, CEO of Air France-KLM, has emphasized the A350’s advantages, including quieter operation, enhanced fuel efficiency, and lower operating costs compared to previous-generation aircraft. These attributes align with the group’s environmental commitments and economic goals. Industry Implications and Market Response Air France-KLM’s move away from the larger A350-1000 model may pose challenges for Airbus’s supply chain and could lead to discussions regarding production adjustments. The decision is likely to attract attention from industry analysts, as it signals a strategic pivot toward more versatile and efficient aircraft amid evolving market dynamics. Competitors such as Lufthansa and International Airlines Group (IAG) may reevaluate their own long-range fleet strategies in response, potentially influencing broader trends in aircraft procurement. This development also raises important questions about the future viability of ultra-long-haul flights and the economic sustainability of larger aircraft in a market increasingly focused on operational flexibility and efficiency. Airlines continue to balance capacity and range considerations as they adapt to shifting passenger demand and operational realities. Airbus Deliveries and Market Demand Despite these shifts in airline preferences, Airbus reported delivering 67 aircraft to 41 customers in July 2025, underscoring sustained demand for new-generation widebody aircraft. Air France-KLM has yet to provide an official comment regarding the recent changes to its A350 order book.

FAA Proposes Extending Newark Flight Restrictions Through 2026 Extension of Flight Caps Amid Ongoing Operational Challenges The U.S. Federal Aviation Administration (FAA) has put forward a proposal to extend flight restrictions at Newark Liberty International Airport through October 2026. This plan, announced in a notice filed on August 8, seeks to slightly increase the current hourly flight cap while addressing persistent air traffic controller shortages and congestion at the critical New York-area hub. The FAA is soliciting public comment as it navigates these operational challenges. The proposal aims to amend and prolong a June order that currently limits flights at Newark and is scheduled to expire later this year. Starting in October, the FAA would permit up to 72 operations per hour—divided equally between 36 arrivals and 36 departures—outside of construction periods. This represents a modest increase from the existing cap of 68 flights per hour but remains below the airport’s typical capacity of approximately 77 operations per hour, as noted by United Airlines CEO Scott Kirby. Background and Industry Implications Flight restrictions at Newark were initially imposed in May following a series of technology outages and staffing shortages that caused widespread delays and cancellations. These issues were further exacerbated by ongoing runway construction, leading to protracted negotiations with affected airlines before the initial flight reductions were implemented. The extended restrictions are primarily intended to mitigate staffing difficulties at a Philadelphia air traffic control facility responsible for managing Newark’s traffic flow. However, the FAA’s proposal arrives amid intensified scrutiny over its prior decisions to relocate air traffic controllers, actions that some industry experts argue have worsened staffing deficits and operational bottlenecks. The potential extension has raised concerns among airlines, particularly United Airlines, which depends on Newark as its largest international hub and a vital domestic gateway. Since the initial restrictions took effect, United has experienced a notable decline in market share at the airport. Industry analysts warn that competitors such as Delta Air Lines may seize the opportunity to expand their presence in the New York City area if United’s operations continue to be constrained. Market responses to the FAA’s proposal are expected to be closely monitored as airlines assess the implications of prolonged capacity limits amid ongoing congestion and staffing challenges. The FAA continues to invite public feedback as it seeks to balance safety considerations with the operational demands of one of the nation’s busiest air travel corridors.

Jet Engines Powered by Used Cooking Oil India is pioneering a novel approach to sustainable aviation fuel (SAF) by converting used cooking oil into jet fuel, marking a significant step in the country’s green aviation ambitions. The Panipat refinery, operated by Indian Oil, has become the first facility in India to produce SAF from used cooking oil, signaling a new phase in the nation’s efforts to reduce carbon emissions in the aviation sector. This development, certified by Cotecna’s Indian division, a Swiss inspection firm, confirms the refinery’s capability to transform kitchen waste into a viable alternative to conventional jet fuel. This initiative aligns with international climate goals, particularly the Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA), a United Nations program aimed at reducing the environmental impact of air travel. India has committed to blending 1% SAF in international flights by 2027, increasing to 2% by 2028, with similar mandates expected for domestic aviation. India’s Biofuel Journey and Emerging Prospects India’s engagement with sustainable aviation fuels has been marked by both innovation and challenges. Early efforts included SpiceJet’s 2018 flight using a blend of traditional aviation turbine fuel and jatropha-based biofuel, developed by the Indian Institute of Petroleum. IndiGo followed with a 10% SAF blend on a ferry flight from Toulouse to Delhi in 2022. While these flights demonstrated the potential of biofuels, widespread adoption has been limited. Jatropha, once considered a promising biofuel crop, ultimately failed to meet expectations due to low yields and competition with food crops. In contrast, ethanol has seen more success, driven by government support under Union Minister Nitin Gadkari. India achieved a 20% ethanol blend in petrol by 2025, five years ahead of schedule, resulting in substantial foreign exchange savings and a dramatic increase in ethanol production from 38 crore litres in 2014 to over 661 crore litres. Looking ahead, the government is focusing on ethanol-based SAF through the alcohol-to-jet (ATJ) pathway, with ambitious targets to produce 30 billion litres annually from crop residues and municipal waste. Although SAF currently remains more expensive than conventional aviation fuel, the environmental advantages are fostering growing interest among policymakers and industry stakeholders. Challenges and the Road Ahead Despite the promising developments, several obstacles could impede the rapid expansion of SAF in India. Regulatory hurdles, competition with established fossil fuels, and the need for new infrastructure pose significant challenges. The market’s response will depend on the perceived environmental benefits and whether SAF can become cost-competitive. Airlines and fuel producers may also explore alternative sustainable fuels or enhance existing technologies to maintain their competitive edge. As India advances its sustainable aviation agenda, the critical question remains whether bio-based fuels like used cooking oil can transition from experimental projects to mainstream aviation fuel sources. For now, the transformation of recycled cooking oil into jet fuel represents a symbolic and practical step toward a greener future in aviation.

Supreme Court Declines Plea for Comprehensive AI Safety Audit Across Airlines Background and Petition Details The Supreme Court of India on Friday dismissed a petition seeking a comprehensive safety audit of all airlines in the wake of the recent Air India AI-171 crash near Ahmedabad on June 12. The petitioners, advocate N K Goswami and L P Goswami—a passenger on Air India flight AI-143—had called for urgent intervention following a fire incident aboard the flight from Delhi to Paris on June 7, which necessitated an emergency landing in Sharjah and resulted in passengers being stranded for 16 hours. The petition alleged systemic safety lapses and deliberate negligence by Air India, urging the court to issue a writ of mandamus to enforce corrective measures. Supreme Court’s Response and Reasoning The bench, comprising Justices Surya Kant and Joymalya Bagchi, expressed reservations about the petition’s narrow focus on a single airline. Justice Kant questioned the rationale behind singling out Air India, emphasizing that concerns about airline safety should not be confined to one carrier. The court suggested that such issues are better addressed through existing regulatory frameworks, including consumer forums, the Directorate General of Civil Aviation (DGCA), and the Union government. The bench further cautioned against any perception that the petition was motivated by competitive interests, advising that a public interest litigation (PIL) encompassing all domestic and international airlines would be more appropriate. Only if regulatory bodies failed to act would the court consider intervention. Implications for the Aviation Sector The Supreme Court’s refusal to mandate an industry-wide safety audit underscores the complexities involved in regulating safety standards across India’s rapidly expanding aviation market. This decision may elicit mixed reactions: some investors and stakeholders might view it as a missed opportunity to enforce stricter safety oversight, while others could interpret the ruling as preserving operational flexibility and encouraging innovation within the sector. Airlines may respond by enhancing their internal safety protocols or advocating for more nuanced regulatory approaches tailored to their specific operational contexts. By emphasizing the need for comprehensive, sector-wide solutions rather than targeting individual carriers, the court’s ruling highlights the delicate balance between regulatory oversight, industry innovation, and passenger safety in India’s aviation landscape.

Brazil’s AllJet Aviation Expands Fleet with Citation Jet Operations AllJet Táxi Aéreo, headquartered in Jundiaí, Brazil, has initiated operations with the Citation Jet series, marking a significant expansion of its business aviation fleet. The company recently incorporated a Citation Jet 2+ (registration PS-ZPN, msn 525A-0428), a 16.6-year-old aircraft configured to accommodate up to ten passengers. Based at Cianorte, the jet commenced operations for AllJet Aviation in July after being imported from the United States earlier this year. However, the aircraft has yet to be added to the company’s RBAC 135 certificate, which currently restricts its availability for charter services until regulatory approval is obtained. This addition complements AllJet Aviation’s existing portfolio, which includes a Global 6000 and a King Air C90 operated privately. The company’s RBAC 135 certificate presently covers a diverse fleet comprising a Citation Sovereign—the sole Citation-series aircraft previously in service—alongside multiple Learjet models, including the Learjet 31, three Learjet 31As, a Learjet 31A(ER), a Learjet 40XR, a Learjet 45, a Learjet 45(XR), and two Learjet 45XRs, one of which was inducted in July. The fleet also features a Legacy 650, a Hawker 4000, and several King Air variants (C90, B200, and B300). Beyond executive charter services, AllJet Aviation provides aircraft management and air medical operations, utilizing Learjet and King Air aircraft for medical missions. Navigating a Competitive Business Aviation Market AllJet’s fleet expansion occurs amid intensifying competition within Brazil’s dynamic business aviation sector. Established manufacturers such as Bombardier maintain a strong presence in South America, with approximately 650 of the region’s 2,200 business jets attributed to the Canadian company. The competitive landscape is further highlighted by Textron Aviation’s recent achievement of securing its first order for a Cessna Citation Longitude in Brazil, reflecting evolving operator preferences and growing market demand. Industry analysts observe that Bombardier is actively broadening its footprint in the United States while enhancing its service and support infrastructure, developments that are expected to influence market dynamics across South America. Concurrently, global business aviation operations experienced a 3.7% year-over-year increase in July, indicating a favorable environment for emerging operators like AllJet Aviation to expand their charter and management services. As AllJet awaits regulatory clearance for its new Citation Jet, the company is strategically positioned to leverage rising demand and navigate the evolving competitive landscape within Brazil’s robust business aviation industry.

Rep. Jennifer Kiggans Introduces the Local Innovation for Flight Technologies Act of 2025 Representative Jennifer Kiggans has introduced H.R. 4686, known as the Local Innovation for Flight Technologies Act of 2025, a bipartisan legislative effort designed to advance the regulation and deployment of unmanned aircraft systems (UAS), commonly referred to as drones, throughout the United States. Supported by seven cosponsors, the bill aims to accelerate the integration of innovative flight technologies while addressing the regulatory and safety challenges that currently limit their broader adoption. Provisions to Expand and Regulate UAS Operations A central feature of the bill is the directive for the Secretary of Transportation to issue a proposed rule within 30 days of enactment to enable routine Beyond Visual Line of Sight (BVLOS) operations for drones. This rulemaking process is to be completed with a final rule within six months, facilitating expanded commercial and public use of UAS beyond the operator’s direct line of sight. To ensure safety, the Secretary is also required to establish performance and safety metrics for BVLOS operations within the same 30-day period. The legislation mandates a comprehensive review of existing regulatory barriers to BVLOS implementation, with findings and recommendations due within 180 days. This review aims to identify and address obstacles that hinder the deployment of advanced drone operations. Additionally, the bill calls for an exploration of compliance options for UAS operating over international waters, focusing on challenges posed by international aviation conventions that currently govern manned aircraft. In a move to modernize administrative processes, the Department of Transportation is tasked with deploying artificial intelligence tools within 120 days to expedite the review of UAS waiver applications. These AI systems will assess operational risks, reference similar approved operations, and help determine categories of drone activities that may not require individual waivers, thereby streamlining regulatory oversight. The bill also establishes a pilot program for electric Vertical Takeoff and Landing (eVTOL) aircraft. This initiative involves coordination between the Secretary of Transportation and the Office of Science and Technology Policy to provide grants to local, state, and tribal governments for eVTOL deployment projects. Selected initiatives must include partnerships with private sector entities experienced in eVTOL development. The program’s progress will be monitored and reported to Congress, with an initial report due within 180 days and subsequent annual updates. Emphasizing domestic industry, the legislation prioritizes the integration of UAS manufactured in the United States into the national airspace system whenever legally permissible. To maintain oversight, the Secretary is required to submit regular progress reports to Congress, ensuring transparency and accountability throughout the implementation process. Industry Impact and Market Considerations The bill’s provisions are poised to influence major aerospace and technology companies, including Boeing, United Airlines, Apple, and Amazon. Boeing and United Airlines stand to benefit from expanded UAS and eVTOL operations, while Apple and Amazon may leverage the streamlined regulatory framework to enhance drone integration and delivery services. By focusing on local innovation and federal grant support, the legislation is expected to stimulate investment in regional aviation technologies. However, it also presents challenges related to balancing federal funding with private sector innovation, ensuring equitable distribution of resources across diverse regions, and navigating the complexities of regulatory compliance. Industry players may respond by forming collaborative partnerships to strengthen regional capabilities or by pursuing strategies to secure federal funding and maintain technological leadership. As the Local Innovation for Flight Technologies Act of 2025 advances through Congress, its development will be closely monitored by stakeholders across the aviation, technology, and logistics sectors.

AAMG Moves to Acquire Lilium’s Assets and Expertise The Ambitious Air Mobility Group (AAMG) has announced its intention to acquire the intellectual property, assets, and testing facilities of Lilium, alongside retaining key technical and certification personnel. This proposed acquisition is aimed at advancing the development and certification of Lilium’s aircraft platform, with plans to establish a European supply chain to support future production should the deal be finalized. Strategic Investment and Development Plans Prior to Lilium entering insolvency proceedings, AAMG had already placed an order for 16 of the company’s aircraft and is now positioning itself to revive the enterprise. The group has declared it holds over €250 million in capital dedicated to this initiative, with potential access to an additional €500 million intended to support expansion efforts across Europe and internationally. Dr. Robert Kamp, CEO and Senior Partner of AAMG, emphasized the significance of the technology developed in Bavaria, describing it as both groundbreaking and economically viable. He highlighted the platform as the culmination of years of work by some of the world’s most talented engineers and expressed enthusiasm about the opportunity to invest in and fully realize its potential. Collaboration and Market Expansion AAMG plans to work closely with a wide network of suppliers, regulatory bodies, and government partners to facilitate the integration and growth of Lilium’s technology. The group has also established a partnership with Japan’s AirMobility Inc., aiming to extend its reach into Asia-Pacific markets and coordinate international development efforts. Challenges and Market Implications Despite the promising outlook, the acquisition faces several challenges. Regulatory scrutiny is expected due to the complexity of integrating advanced aviation technologies and the necessity of certification across multiple jurisdictions. The process of merging Lilium’s expertise and assets with AAMG’s existing operations may present operational difficulties. Furthermore, competitors in the air mobility sector may respond with strategic initiatives such as forming new alliances or accelerating their own research and development programs. Investor reaction will likely depend on perceptions of the strategic alignment and financial impact of the acquisition on AAMG. While the company’s substantial capital reserves and international ambitions provide a strong foundation, the ultimate success will depend on navigating regulatory, operational, and competitive challenges effectively. Details regarding the sources of AAMG’s funding have not been disclosed. Nevertheless, the company’s international partnerships and expansion plans indicate a broader strategy to establish a leading position in the rapidly evolving air mobility market.

Boeing Praised for Early 737 MAX Deliveries Amid Industry Challenges Boeing has been commended by Copa Airlines for delivering several 737 MAX aircraft ahead of schedule, a notable accomplishment following years of widespread delivery delays across the aviation sector. This recognition arrives as the American aerospace giant continues to contend with persistent supply chain disruptions and intensifying competition within the commercial aviation market. Early Deliveries and Fleet Expansion at Copa Airlines During Copa Airlines’ second-quarter earnings call on August 7, 2025, CEO Pedro Heilbron revealed that the Panama City-based carrier received three Boeing 737 MAX 8 jets one to two weeks earlier than anticipated. Heilbron noted, “So far, our deliveries have been early… Everything has come a week or two before what was projected or scheduled. Of course, everything is delayed if we go back to the original date,” acknowledging the broader context of prior setbacks in the industry. In addition to these early arrivals, Copa Airlines expects to take delivery of ten more 737 MAX 8 aircraft by the end of 2025, with six additional jets scheduled for the first half of 2026. The airline concluded the quarter with a fleet of 115 aircraft, comprising 67 Boeing 737-800s, 32 Boeing 737 MAX 9s, nine Boeing 737-700s, six Boeing 737 MAX 8s, and one Boeing 737-800 freighter. Boeing’s Production Challenges and Market Competition These timely deliveries are particularly significant as Boeing continues to face challenges in launching new 737 MAX variants. Safety concerns and regulatory scrutiny have delayed certification processes and production ramp-ups. Currently, the company is limited to producing 38 737 MAX jets per month under mandates from the U.S. Federal Aviation Administration (FAA). Boeing must obtain further FAA approval before it can increase production capacity. Meanwhile, Airbus has intensified efforts to capture a larger share of the market, responding to Boeing’s vulnerabilities with aggressive sales campaigns and production strategies. These competitive dynamics have contributed to fluctuations in Boeing’s stock prices and investor sentiment, as the market closely monitors the company’s attempts to reset its business and restore confidence following previous setbacks. Copa Airlines’ Financial Performance and Outlook For Copa Airlines, the improved delivery schedule supports its outlook for year-over-year capacity growth in 2025 and early 2026. Although the airline has not issued financial guidance for 2026, the arrival of new aircraft is expected to enhance its operational capabilities. Financially, Copa Airlines reported a strong second quarter in 2025, posting a net profit of $148.9 million, representing a 25.2% increase compared to the same period last year. Operating revenues rose to $842.6 million, up 2.8% year-over-year, while the load factor increased to 87.3%, driven by a 5.8% rise in available seat miles. The carrier ended the quarter with $1.4 billion in cash and investments, equivalent to 39% of annual revenue, and maintained a robust adjusted net debt to EBITDA ratio of 0.6x. Of its 115 aircraft, 42 are fully paid off and unencumbered. As Boeing strives to overcome production constraints and rebuild its reputation, the early deliveries to Copa Airlines represent a positive development, even as significant challenges persist for the manufacturer and the broader aviation industry.