Rolls-Royce Develops Technology to Protect Jet Engines from Sand Damage

US Audit Identifies FAA Oversight Gaps at United Maintenance Federal Audit Reveals Deficiencies in FAA Supervision A recent audit conducted by the U.S. Department of Transportation’s Office of Inspector General (OIG) has exposed significant deficiencies in the Federal Aviation Administration’s (FAA) oversight of United Airlines’ maintenance operations. The report highlights concerns about the FAA’s capacity to ensure airline safety amid persistent staffing shortages and inadequate training within its inspection workforce. The audit, which examined FAA activities from May 2024 through December 2025, found that the agency has not fully implemented prior recommendations aimed at strengthening oversight. Key issues identified include insufficient workforce planning, limited inspector capacity, and ineffective training programs. These shortcomings have resulted in inadequate evaluation of safety risks associated with United’s extensive and complex fleet. Impact of Staffing Shortages and Inspection Practices The OIG report points to chronic staffing shortages and high turnover rates at FAA inspection offices as primary factors contributing to reduced inspections and diminished surveillance of maintenance operations. Inspectors reported being instructed by front-line managers to conduct certain reviews virtually, despite agency policies mandating on-site inspections when remote assessments are deemed inappropriate. The reliance on virtual inspections raises safety concerns, as it increases the likelihood that inspectors may overlook or misidentify critical maintenance issues that would be more apparent during in-person evaluations. Additionally, inspectors face challenges in accessing United Airlines’ safety data systems, limiting the FAA’s ability to analyze maintenance trends and detect emerging risk patterns. The report underscores that ineffective workforce training and restricted data access further impair the agency’s oversight capabilities. Context of Recent Maintenance-Related Incidents These oversight gaps come against the backdrop of several high-profile maintenance-related incidents involving United Airlines. In March 2024, passengers were evacuated after a United jet rolled off a runway in Houston. The following day, another United aircraft lost a tire during takeoff from San Francisco but managed to land safely in Los Angeles. More recently, in December 2025, a United flight experienced an engine failure during takeoff from Washington Dulles but returned safely to the airport. Recommendations and Responses The OIG report calls for a comprehensive reevaluation of FAA staffing models and regulatory rules, alongside an independent workplace survey to assess inspector workload and organizational culture. It also recommends enhanced training focused on accessing and analyzing United’s safety data systems to improve oversight effectiveness. In response, the FAA acknowledged agreement with most of the recommendations and outlined plans to implement corrective measures by the end of the year. These include strengthening training programs and reassessing workforce needs to address the identified deficiencies. United Airlines emphasized its ongoing collaboration with the FAA and reaffirmed its commitment to maintaining a robust internal safety management system. The airline also highlighted the necessity of adequate regulatory resources to support effective oversight. The FAA declined further comment beyond its letter to the inspector general’s office. The audit’s findings underscore persistent challenges in federal oversight of airline maintenance, particularly as the aviation industry contends with increasing operational complexity and heightened safety demands.

The Impact of Agentic AI on Airport Operations As airports around the globe pursue modernization, agentic artificial intelligence (AI) is emerging as a pivotal technology with the potential to transform fragmented operational tools into integrated, goal-oriented systems. In anticipation of the International Airport Review’s breakfast briefing in London during PTE on 18 March, Jordi Valls, Global Director at SITA Labs, outlined how agentic AI could fundamentally reshape airport operations, contingent upon the establishment of robust data infrastructures, governance frameworks, and sustained human oversight. Advancing Beyond Traditional AI Traditional AI applications in airports have predominantly centered on predictive analytics, dashboards, and alert systems. According to Valls, agentic AI represents a significant evolution beyond these capabilities. Unlike conventional AI, which primarily forecasts delays or assists with isolated tasks, agentic AI is designed to reason across multiple objectives, constraints, and operational roles. It can propose or autonomously execute coordinated actions by evaluating options and balancing trade-offs across various systems and teams. This transition from isolated, assistive tools to systems exhibiting goal-driven behavior is particularly consequential in the complex and time-sensitive environment of airport operations. Partial Autonomy Within Operational Domains While the concept of fully autonomous airports remains a distant prospect—complicated by regulatory, labor union, and safety considerations—agentic AI is expected to introduce partial autonomy in targeted operational areas. Functions such as disruption management, resource reallocation, and interdepartmental coordination stand to benefit from streamlined processes, with agentic AI serving as the integrative mechanism linking disparate systems. Valls emphasizes that progress over the coming decade will be measured not by fully unmanned operations but by reductions in operational friction and accelerated recovery times. The Imperative of Unified Data Architecture A critical prerequisite for the effective deployment of agentic AI is the establishment of a unified operational data architecture. Consistent and shared data regarding flight statuses, resource availability, and passenger flows are essential to prevent decision-making based on incomplete or conflicting information—a risk that could have severe consequences in safety-critical airport environments. Valls clarifies that a common operational data layer is not about centralizing data but about achieving alignment across systems. Neglecting this foundational step could lead to fragile automation, undetected errors, and erosion of trust among operational personnel, thereby exacerbating fragmentation rather than resolving it. Immediate Applications and Benefits In the short term, agentic AI is poised to deliver significant improvements in disruption recovery, turnaround coordination, and baggage exception handling. These operational areas are data-rich but often suffer from delayed or suboptimal decision-making under pressure. Agentic AI can integrate inputs from airlines, ground handlers, and airport operations to generate prioritized, real-time action plans, thereby reducing coordination delays and enabling more informed decisions even when data is incomplete. For instance, during severe weather disruptions, agentic AI can continuously reassess priorities related to aircraft scheduling, crew legality, gate assignments, and passenger connections. Rather than relying on static contingency plans, the system can dynamically adjust operations by reallocating gates, resequencing services, alerting relevant teams, and flagging critical issues as they emerge. Emerging Challenges and Industry Implications The adoption of agentic AI also introduces new challenges for airports and airlines. Increased competition from AI-enabled rivals may compel industry players to reevaluate their strategic approaches and accelerate the development of advanced AI capabilities. Additionally, the growing reliance on AI heightens exposure to data scraping and cybersecurity threats, raising concerns about operational vulnerabilities and potential liabilities, particularly when third-party AI solutions are involved. As agentic AI becomes more deeply embedded in airport operations, the sector must address these risks through comprehensive governance, enhanced cybersecurity protocols, and clearly defined accountability mechanisms. Agentic AI holds considerable promise for enabling smarter, faster, and more resilient airport operations. However, realizing these benefits will depend on meticulous attention to data integrity, sustained human oversight, and proactive management of emerging risks within an increasingly competitive and complex operational landscape.

West Star Aviation Expands Chattanooga Facility to Meet Growing Demand West Star Aviation has announced a significant expansion of its Chattanooga Airport campus, responding to increasing demand for aircraft maintenance services and aiming to solidify its competitive standing in the regional market. Scheduled for completion by February 2027, the project will enlarge the facility to approximately 400,000 square feet, incorporating substantial upgrades across two primary areas of the campus. Facility Enhancements and Operational Upgrades Central to the expansion is the construction of Hangar 26, which will provide 40,000 square feet of hangar space alongside 15,000 square feet allocated for shop and office use. This new space will accommodate customer and program offices as well as climate-controlled storage designed to protect aircraft interiors and property during maintenance operations. The facility will also feature enhanced safety and operational improvements, including an overhead crane, fall-protection systems, fire-rated document storage, and an upgraded customer lounge, all intended to boost efficiency and enhance the client experience. In addition, the existing Hangar 27 will be extended with a new two-story, 30,000-square-foot addition. This expansion will house a larger Aircraft Service Department, Accessories Shop, Composites Shop, and Sheet Metal Shop, consolidating critical functions to streamline workflows and reduce turnaround times. Mike Ditmeyer, Vice President and General Manager of the Chattanooga location, emphasized the significance of the development: “This is a very exciting time for West Star Aviation as we continue to grow here at Chattanooga Airport. The site expansion strengthens our foundation to support our customers’ maintenance needs and further develop our team’s expertise. The pride, quality, and teamwork of this group are at the heart of this facility.” Economic Impact and Regional Market Dynamics The expansion is expected to generate up to 200 skilled jobs over the next five years, augmenting the company’s existing workforce of more than 500 employees in Chattanooga. This growth reflects West Star Aviation’s commitment to bolstering Tennessee’s workforce and contributing to the regional economy. The announcement comes amid intensifying competition within the regional maintenance, repair, and operations (MRO) sector. Established providers such as Sheltair, which is actively pursuing a major maintenance provider in Tampa, and Baykar’s new Piaggio MRO facility in Oklahoma, are expanding their presence. Industry analysts note that West Star’s capacity to integrate new mission systems and maintain its growth trajectory will be closely observed, particularly as the broader aviation industry faces challenges impacting major manufacturers like Airbus and Boeing. Competitors in the Chattanooga area may respond by enhancing their own service offerings to retain or attract clients, potentially fostering a more dynamic and competitive market environment. West Star’s Chattanooga facility, as a full-service location, enables customers to complete all necessary work—from scheduled maintenance to avionics upgrades, interior refurbishment, and paint—under one roof, simplifying scheduling and minimizing aircraft downtime. Strategically located with convenient access across the Southeast, East Coast, and North Central United States, West Star Aviation is positioning its Chattanooga campus as a key hub for reliable maintenance support amid a rapidly evolving MRO landscape.

Aviation Design Software Market Projected to Reach $2.8 Billion The global Aviation Design Software Market is on track for significant expansion, driven by increasing demand from commercial aerospace, defense modernization efforts, and the growing complexity of aircraft architectures. Verified Market Reports estimates the market was valued at $1.5 billion in 2024 and forecasts it will reach $2.8 billion by 2033, reflecting a compound annual growth rate (CAGR) of 7.5% between 2026 and 2033. Market Drivers and Technological Advancements The growth of the aviation design software sector is underpinned by advances in digital engineering, model-based design, and simulation optimization. These technologies facilitate faster aircraft development cycles, enhanced cost management, and more efficient regulatory compliance. Cutting-edge solutions incorporating cloud deployment, artificial intelligence (AI), and digital twin technologies have become indispensable for design validation, aerodynamic analysis, and systems integration. Additionally, the integration of additive manufacturing-ready design modules and adherence to global regulatory standards are accelerating time to market and enabling strategic program execution for original equipment manufacturers (OEMs) and Tier 1 suppliers. In 2025, global aerospace digital engineering expenditures surpassed $9 billion, with design-focused platforms representing nearly 30% of this investment. This surge is fueled by expanding aircraft order backlogs, which now exceed 15,000 units worldwide, alongside sustainability mandates and the imperative to shorten development timelines. OEMs and suppliers are increasingly shifting from fragmented software tools to integrated environments that support concurrent engineering, lifecycle traceability, and real-time collaboration. Defense modernization budgets across the United States, Europe, and the Asia-Pacific region are further propelling investments in digital design technologies. Emerging sectors such as urban air mobility and electric aircraft programs are also driving early adoption of advanced design tools. Cloud-enabled platforms are reducing upfront capital expenditures by up to 40% for mid-sized suppliers, while regulatory digitization initiatives by authorities like the Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA) are streamlining software-driven certification processes. Market Trends and Competitive Landscape Several key trends are shaping the market’s trajectory. The demand for advanced modeling capabilities is rising, particularly in response to electric propulsion and hydrogen-powered aircraft concepts. Regulatory bodies are increasingly supporting digital thread adoption, which enhances traceability and safety throughout the design and manufacturing lifecycle. The shift toward recurring subscription revenue models is improving vendor margin stability, while digital collaboration across aerospace supply chains is helping to reduce program delays. Furthermore, increased venture capital funding is broadening the user base beyond traditional OEMs. AI-driven generative design techniques are demonstrating early success by reducing component weight by 10 to 20 percent, while automation in meshing and simulation processes is cutting engineering hours by up to 30 percent. Cloud-native architectures facilitate collaboration among global teams and enable remote certification reviews. Innovations in digital twin technology are also strengthening long-term customer relationships. Despite these positive developments, the market faces challenges in transitioning to cloud-based subscription models and integrating AI tools effectively. Dassault Systèmes recently experienced a 20 percent decline in market share following a weak outlook for 2026, highlighting the competitive pressures within the industry. The sector is witnessing a surge in mergers and acquisitions, with the U.S. M&A market increasing by 111 percent amid an AI-driven supercycle. In response, companies are pursuing strategic pivots: Saab has partnered with Divergent Technologies to develop software-defined fuselage solutions, while Embraer is focusing on E2 aircraft sales rather than launching new airliner programs. Major aerospace players such as Airbus and Boeing are managing increased production rates and making critical decisions regarding future aircraft development, underscoring the vital role of agile and innovative design software solutions in this rapidly evolving market. Outlook As the aviation industry continues its digital transformation, the Aviation Design Software Market is poised to play a central role in shaping the next generation of aircraft. This market will support both established manufacturers and emerging entrants as they navigate a highly competitive and technologically dynamic landscape.

The Future of Aviation in Africa Amid Digital Transformation Digital transformation is fundamentally altering industries across the globe, with the aviation sector experiencing profound shifts. In aerospace and defense, digitalisation has become indispensable for enhancing operational efficiency, accelerating product development, and managing increasingly complex systems. Despite substantial investments, many organisations struggle to achieve the anticipated return on investment (ROI). This challenge is particularly acute in African aviation, where limited financial and human resources intersect with intricate operational demands. Siemens’ “Five Levels of Digital Transformation Maturity” provides a strategic framework that is especially relevant for African aviation stakeholders, notably airports, as they navigate this evolving landscape. The framework highlights that digital maturity extends beyond the mere adoption of new technologies; it requires a fundamental rethinking of organisational operations and value delivery. Understanding Digital Transformation Maturity Digital transformation maturity assesses the extent to which digital processes are embedded within an organisation. At its most basic, digitisation replaces manual or paper-based workflows with digital alternatives, improving efficiency without fundamentally changing operations. More advanced stages involve system integration, cross-functional data utilisation, and the deployment of sophisticated tools such as digital twins, advanced analytics, and automation to optimise decision-making and overall performance. Siemens’ roadmap delineates five progressive stages, guiding organisations from isolated digital tools to fully integrated, intelligent, and adaptive enterprises. However, a Siemens-sponsored survey conducted across the Aviation Week network reveals that many aerospace companies remain in intermediate stages. While they have invested in technology, they often lack the organisational alignment and data integration necessary to unlock full value—a scenario that resonates strongly within African aviation. African Aviation: Complexity, Constraints, and Opportunity Airports represent some of the most complex business environments, functioning as ecosystems that encompass airlines, ground handlers, security agencies, regulators, retailers, and passengers. In Africa, this complexity is compounded by infrastructure deficiencies, fragmented legacy systems, and constrained budgets. Unlike major global hubs, many African airports operate with small IT teams and limited capital expenditure, yet they face comparable expectations regarding safety, security, punctuality, and passenger experience. The future of aviation in Africa will be shaped by several critical challenges and opportunities. Upgrading both physical and digital infrastructure remains a pressing priority, as many airports require modernised systems to support digital transformation initiatives. Regulatory harmonisation across countries is essential to facilitate seamless operations and technological integration, particularly as initiatives like the Single African Air Transport Market (SAATM) gain momentum. Furthermore, integrating new digital tools with existing legacy systems presents a complex but necessary task to achieve higher levels of digital maturity. Pathways to Progress: Applying the Maturity Model For African airports and aviation authorities, Siemens’ maturity model offers a pragmatic, incremental approach. Initial efforts should concentrate on standardising and digitising core processes such as asset management, maintenance scheduling, and passenger flow monitoring. Advancing to intermediate stages involves integrating these systems to enable data sharing across departments, thereby enhancing visibility into costs, performance, and capacity constraints. While advanced maturity levels—such as predictive analytics and digital twins—may appear ambitious, they are increasingly attainable and relevant. Predictive maintenance, for instance, can enable airports to anticipate equipment failures and optimise resource allocation, thereby improving operational resilience. Market and Competitive Dynamics Market responses to digital transformation are already evident. Initiatives like SAATM and visa reforms are stimulating increased intra-African travel demand. In turn, competitors are enhancing regional connectivity and leveraging digital tools to improve operational efficiency and customer experience. Ultimately, the trajectory of African aviation will hinge on the sector’s capacity to navigate digital transformation strategically. Success will require balancing ambition with pragmatism and harnessing technology to deliver safer, more efficient, and more connected air travel across the continent.

Gyeongnam Province Unveils Mid- to Long-Term Aerospace Industry Roadmap South Gyeongsang Province, commonly known as Gyeongnam, has revealed an ambitious mid- to long-term strategy aimed at establishing itself as a premier hub for the aerospace industry. The province’s plan targets the cultivation of 20 companies each generating annual sales exceeding 100 billion won, alongside achieving a total aerospace production value of 30 trillion won by 2035. This initiative aligns with South Korea’s broader “K-space” vision and the national aspiration to rank among the world’s top five aerospace powers. Strategic Pillars and Industrial Development At a press briefing held on the 23rd, provincial officials detailed four core strategies designed to elevate Gyeongnam’s aerospace sector. These include upgrading the advanced aviation industry ecosystem, establishing a foundation for the next-generation space industry, fostering a technology ecosystem for future aviation, and completing the infrastructure necessary to become a global aerospace capital. Central to this roadmap is the development of a specialized high-tech aviation engine complex within the Changwon National Industrial Complex. This site will be designated as a national high-tech strategic industry zone focused on defense. The complex is set to host leading aerospace firms such as Hanwha Aerospace, Doosan Energy, and Seah Changwon Special Steel, supported by comprehensive facilities for testing, evaluation, certification, and maintenance of aviation engines. The province aims to achieve technological self-reliance in aviation engine manufacturing by creating an integrated ecosystem that spans materials and parts production through to repair and certification. In parallel, Gyeongnam plans to accelerate growth in the Maintenance, Repair, and Overhaul (MRO) sector. The Sacheon Aviation MRO Industrial Complex is scheduled for completion next month, complementing existing clusters of aviation parts suppliers in Jinju and Sacheon centered around Korea Air Service (KAEMS). The roadmap includes establishing a comprehensive Air MRO Support Center and an Air Defense MRO Cluster as national projects, positioning the region as a consolidated MRO hub serving both civilian and military aviation needs. Advancing Space Industry and Addressing Global Challenges To bolster its space industry capabilities, Gyeongnam will invest 174.3 billion won by 2028 in the development of a satellite innovation center in Sacheon and a space environment test facility in Jinju. The province also plans to host an Aerospace Defense Industry Exhibition and advocate for the enactment of a special law to facilitate the creation of aerospace complex cities, further strengthening its industrial ecosystem. These ambitions come amid significant global challenges. The International Air Transport Association has underscored persistent supply chain disruptions impacting airlines and manufacturers worldwide, including major players such as Airbus and Boeing. Market competition is intensifying, with Boeing recently reporting a financial turnaround and increasing production of its 737 MAX and 777X aircraft. Meanwhile, competitors are advancing rapidly in unmanned aerial vehicle technology, exemplified by Korea Aerospace Industries’ unveiling of two Collaborative Combat Aircraft models ahead of the Singapore Airshow 2026. Geopolitical tensions and the imperative to reduce emissions are also shaping the aerospace sector’s strategic landscape. Gyeongnam’s roadmap reflects the complex interplay of opportunities and challenges inherent in building a globally competitive aerospace industry within this dynamic environment.

Delta Flight Experiences Engine Failure, Ignites Grass Fire at Savannah Airport A Delta Air Lines flight bound for Atlanta was forced to return to Savannah/Hilton Head International Airport on Sunday evening after encountering engine trouble shortly after takeoff. The incident resulted in a grass fire near the runway and caused significant disruptions to air travel. Incident Details and Response Flight 1067, operated by a Boeing 737-900, departed from Savannah but soon after takeoff experienced a mechanical failure in its left engine. Passengers reported hearing a loud boom during the aircraft’s initial ascent. Although the plane briefly lifted off, it maintained a low altitude before safely returning to the airport. The malfunctioning engine ignited a grass fire adjacent to the runway around 7 p.m., prompting an immediate response from local fire crews who extinguished the blaze within approximately 30 minutes. Passengers disembarked at the gate about an hour after landing, and no injuries were reported. Broader Impact on Delta Operations The engine failure and resulting fire contributed to delays and diversions at Savannah’s airport, exacerbating a weekend already marked by widespread travel disruptions for Delta. On Saturday alone, the airline canceled over 500 flights, with many issues concentrated at its Atlanta hub. These disruptions affected thousands of travelers across major U.S. airports, including Chicago, Washington D.C., and Newark. Delta also faced additional challenges earlier in the weekend. A separate flight from Houston to Atlanta experienced engine trouble, leading to an emergency landing and another grass fire. Furthermore, the airline dealt with a security incident involving a passenger attempting to breach the cockpit on a different flight, which necessitated an emergency landing in Houston. These events have underscored ongoing operational difficulties for Delta, encompassing both mechanical failures and passenger-related security concerns. Official Statements and Ongoing Investigation In an official statement, Delta confirmed the mechanical issue with Flight 1067’s left engine and emphasized the safe landing and evacuation of passengers. The airline reiterated that customer and crew safety remains its highest priority and expressed regret for the travel delays caused. Delta is actively working to rebook affected passengers on alternate flights. The Federal Aviation Administration has launched an investigation into the engine failure and the subsequent fire. While Delta continues to manage the situation, the timeline for resuming normal service and completing passenger travel remains uncertain. Travelers are advised to consult Delta for the latest flight status updates as the airline addresses these ongoing disruptions.

Sarawak’s AirBorneo Partners with IBM to Launch AI-Powered Airline Operations KUCHING — AirBorneo, Sarawak’s newly established state-owned full-service airline, has entered into a strategic partnership with IBM Malaysia Sdn Bhd to develop artificial intelligence (AI)-driven data and automation solutions in preparation for its commercial launch scheduled for 2026. Embracing AI for Seamless Operations In a statement released on Monday, AirBorneo outlined its plan to adopt an integrated digital architecture aimed at supporting seamless operations, data-driven decision-making, and enhanced customer experiences from the outset. The airline will deploy IBM webMethods Hybrid Integration and IBM Cloud Pak for Integration to automate and interconnect critical business processes, applications, and data flows across its operational ecosystem. This digital framework is designed to provide real-time visibility, secure data exchange, and increased operational agility. Megat Ardian Wira Mohd Aminuddin, AirBorneo’s chief executive officer, highlighted the airline’s commitment to leveraging AI capabilities across various facets of its operations, from intelligent customer engagement to optimized flight management. “As we prepare for our jet operations in July 2026, our vision is to deliver a seamless travel experience and strengthen regional connectivity to Sabah and Sarawak, pioneering innovations that redefine the nation’s aviation landscape,” he stated. IBM’s Role and Industry Challenges Dickson Woo, IBM Malaysia’s country general manager and technology leader, emphasized that establishing a world-class airline extends beyond acquiring aircraft and infrastructure. “It requires an intelligent digital foundation that anticipates passenger needs, streamlines operations, and empowers its people. The IBM-AirBorneo collaboration underscores our shared commitment to placing AI at the core of AirBorneo’s transformation, shaping the future of aviation through innovation and intelligence,” Woo remarked. Despite the promising outlook, integrating AI-powered operations presents considerable challenges. AirBorneo must navigate the complexities of merging advanced AI systems with existing processes while ensuring alignment with operational objectives. Additionally, the airline faces the task of managing potential resistance from staff accustomed to traditional workflows, necessitating comprehensive change management and training programs. Market Response and Future Implications Reactions within the market to AirBorneo’s digital transformation have been mixed. Some industry observers express skepticism regarding the effectiveness of AI in aviation, while investors remain cautious amid recent volatility in software stocks linked to uncertainties in the AI sector. In response, competing airlines may accelerate their own AI adoption strategies or intensify efforts to develop proprietary digital solutions to maintain competitiveness. IBM, a global leader in hybrid cloud, AI, and consulting services, supports clients in over 175 countries by helping them harness data insights, streamline operations, reduce costs, and gain competitive advantages. As AirBorneo advances toward its 2026 launch, its partnership with IBM represents a significant step toward redefining Malaysia’s aviation sector through technology-driven innovation, despite the challenges that lie ahead.

Philippine Aerospace and MRO Exports Surge to $603 Million The Philippines is intensifying its efforts to attract investments in aerospace manufacturing and maintenance, repair, and overhaul (MRO) services, capitalizing on steady export growth and deeper integration into global supply chains. According to the Board of Investments, aerospace exports from the Philippines reached US$590.2 million in 2024 and further increased to US$603.1 million in the first nine months of 2025. The country’s key export markets include the United States, Singapore, France, and China. Strategic Promotion at Singapore Airshow 2026 Building on this positive momentum, the Department of Trade and Industry (DTI), through the Philippine Trade and Investment Centre in Singapore (PTIC-Singapore), actively promoted the nation’s aerospace manufacturing, parts production, sub-assemblies, and MRO services at the Philippine Pavilion during the Singapore Airshow 2026. Led by Commercial Counsellor Carla Grepo, the DTI Singapore team facilitated business matching and targeted introductions between Philippine firms and potential foreign investors, buyers, and partners. This engagement also sought to strengthen industry collaboration, notably between the Aerospace Industries Association of the Philippines and the Association of Aerospace Industries Singapore. The Philippines hosts established aerospace manufacturers and global MRO operators, supported by a growing local supplier base specializing in precision machining, components, and assemblies. These operations are strategically located within investment-ready industrial zones and airport-linked developments. Challenges Amid Regional Competition and Market Dynamics Despite these advances, the sector faces significant challenges in expanding its global footprint. Competition from established industry leaders remains intense. For instance, RTX, a major multinational aerospace and defense firm, recently committed $139 million to MRO investments in Singapore, highlighting the competitive environment in the region. Such developments may lead to increased scrutiny from regulators and customers regarding service quality and cost efficiency, while competitors may respond with aggressive pricing or enhanced service offerings to maintain market share. Operational challenges persist as well, including regional workforce constraints and the need to develop new engine MRO capabilities. These issues were underscored in recent industry discussions such as the Aviation Week MRO Podcast. The Asia-Pacific engine MRO market is projected to exceed $30 billion by 2035, presenting both significant opportunities and complex challenges amid evolving technological and regulatory demands. Collaborative Industry Presence and Future Prospects The Philippine Pavilion at the Singapore Airshow brought together economic agencies, infrastructure operators, and private-sector firms engaged in aviation and aerospace. Delegates included representatives from the Civil Aviation Authority of the Philippines, Philippine Airlines, Clark International Airport Corporation, Aerospace Industries Association of the Philippines, LIPAD Corporation, Poro Point Management Corporation, European Chamber of Commerce of the Philippines, Berthaphil Inc., Skytrack Aviation Services, Skyway Airlines, and Wingbox Aviation. Sponsored by the Bases Conversion and Development Authority and the Department of Tourism, the Pavilion was open to visitors from February 3 to 6, 2026. Singapore’s role as a regional headquarters hub for global aviation and aerospace firms provides a strategic platform for investment discussions, particularly for companies seeking manufacturing and service partnerships in Southeast Asia. Interested parties are encouraged to contact PTIC-Singapore at singapore@dti.gov.ph for further engagement.

Economic Growth Drivers Show Signs of Slowing Aviation Industry Faces Unprecedented Challenges Aircraft engines have surged in value, now often exceeding the worth of the planes they power. Persistent maintenance difficulties and a global shortage of spare parts have grounded hundreds of aircraft over recent years, disrupting operations across the aviation sector. According to aircraft lessor Avolon, engines on new short-haul aircraft can represent up to 80% of the plane’s total value, a dramatic increase from two decades ago when engines accounted for just 30%. By the time an aircraft reaches six years of age, its engines may be worth more off the wing than on it. This shift is particularly striking given that the average commercial aircraft is currently 15 years old. The latest generation of fuel-efficient engines, while technologically advanced, demand more frequent and intensive maintenance, leading to extended ground times. These challenges have been compounded by a shortage of spare parts worldwide and a significant inspection campaign by US manufacturer Pratt & Whitney. The company has been scrutinizing hundreds of its geared turbofan (GTF) engines, which power the Airbus A320neo, after identifying a defect that could cause cracks. Budget airline Wizz Air has been notably affected, with over 30 aircraft grounded at the start of this year, some remaining out of service for more than a year. The cost of leasing engines has escalated sharply, now surpassing the expense of leasing entire replacement aircraft for short-haul operations. This unusual market dynamic has led to the dismantling of at least 17 Airbus A320 and A321 neo aircraft to harvest engines for sale or lease, according to aviation analyst Cirium. Avolon has described the aviation supply chain as “fragile,” emphasizing that aircraft groundings have persisted stubbornly. The company warns that the current maintenance, repair, and overhaul (MRO) “super-cycle” is expected to continue, with engine manufacturers increasing shop visit and spare-part prices at rates well above inflation. These groundings are projected to last through 2028. Broader Economic Implications and Industry Responses The supply chain pressures have bolstered the market valuations of engine manufacturers such as GE Aerospace and Rolls-Royce, with Rolls-Royce shares outperforming even those of leading AI chipmaker Nvidia. The rising costs and ongoing shortages have forced airlines to reconsider their maintenance strategies. Ryanair, for instance, recently unveiled a multibillion-dollar initiative to internalize engine maintenance through a partnership with CFM, a joint venture between GE Aerospace and Safran Aircraft Engines. Starting in 2029, Ryanair plans to operate two engine maintenance workshops servicing its fleet and nearly 2,000 engines, supported by a $1 billion annual spare parts agreement. CEO Michael O’Leary described engine costs as “completely out of control,” warning of significant inflationary pressures on new aircraft, engines, and repairs over the coming decade. These aviation-specific challenges mirror broader economic headwinds affecting multiple sectors. Traditional growth drivers are showing signs of fatigue amid moderating housing market activity, slowing construction starts, and labor market uncertainties, even as recession risks remain low. Job growth is increasingly decoupled from economic expansion, raising concerns about wage stagnation and job security. Liquidity pressures persist in private capital markets, with aging fund portfolios and a growing dependence on secondary markets. Meanwhile, the S&P 500’s growth narrative is evolving, shifting from AI-driven gains toward renewed emphasis on Old Economy sectors and productivity enhancements. For emerging regions such as Cambodia and the wider ASEAN bloc, the aviation sector’s difficulties highlight the critical importance of supply chain resilience and long-term investment strategies. As global growth slows and trade risks intensify, robust supply chains and strategic planning will be essential to navigating an increasingly uncertain economic environment.