Rolls-Royce’s Dahlewitz Facility Receives First Trent 1000 Engine as Capacity Increases

Archer Aviation Shares Rise 8% Amid Air-Taxi Sector Rally Archer Aviation’s shares surged 8.4% to close at $8.13 on Friday, reflecting a wave of investor enthusiasm sweeping through the air-taxi sector. The stock traded between $7.51 and $8.20 on heavy volume of approximately 45 million shares, about 41% above its daily average. This rally signals renewed optimism for early-stage aviation companies as the new year begins. Sector Momentum and Government Support The gains in Archer’s stock were part of a broader advance among electric vertical takeoff and landing (eVTOL) developers. Joby Aviation’s shares rose 8.8%, while Vertical Aerospace climbed 9.7%. This momentum is underpinned by growing interest from both investors and government entities. Notably, the Trump administration’s 10-year strategy to promote U.S. air-taxi development and the Pentagon’s exploration of hybrid, autonomous air taxis have contributed to heightened sector confidence. Challenges Facing Archer and the Industry Despite the recent rally, Archer and its peers continue to face significant challenges. The industry remains largely pre-revenue, with valuations driven by expectations of future operations rather than current earnings. Key obstacles include regulatory approval, technological competition, and public acceptance. Archer is actively working toward certification and scaling manufacturing for its eVTOL aircraft, designed for short-distance urban flights. The company marked a milestone with the first piloted flight of its Midnight eVTOL in 2025. Meanwhile, competitors such as Pipistrel and Lodd have achieved initial hover flights of hybrid-electric uncrewed cargo eVTOLs. Market acceptance will also depend heavily on infrastructure development and public perception. An initiative led by Miami billionaire Stephen Ross to introduce Archer’s flying taxis in Miami, supported by local government, highlights both the potential and complexities involved in integrating air taxis into urban environments. Investor Sentiment and Market Outlook Investor sentiment remains sensitive to broader economic indicators. The upcoming release of the ISM manufacturing purchasing managers’ index (PMI) and the January 9 jobs report are closely watched, as changes in interest rates and bond yields can significantly affect high-growth, high-beta stocks like Archer. Matthew Maley, chief market strategist at Miller Tabak, noted that “the market is looking for direction,” underscoring the cautious optimism prevailing among investors. In addition, a recent Form 144 filing disclosed that Archer insider Thomas Muniz intends to sell 125,000 Class A shares, valued at approximately $1 million, through Fidelity Brokerage Services. While such filings are routine under SEC Rule 144 and do not guarantee a sale, they can influence sentiment in volatile and thinly traded stocks. As the air-taxi sector progresses, regulatory milestones, technological advancements, and financial sustainability will remain critical factors for Archer and its competitors. The industry’s trajectory in 2025, marked by key test flights and increasing government engagement, suggests a landscape of both promise and persistent challenges.

easyJet Airbus A320 Makes Emergency Landing at Lamezia Terme Following Engine Failure An easyJet Airbus A320-200, operating flight EJU3557 from Milan Malpensa to Lamezia Terme, was compelled to execute an emergency landing on December 27, 2025, after experiencing a catastrophic failure of its left engine. The aircraft, registered OE-IVZ, encountered the engine malfunction at approximately 25,000 feet, roughly 50 nautical miles from its destination during descent. Incident Timeline and Response Flight EJU3557 departed Milan Malpensa at 08:13 CET without incident. However, as the aircraft commenced its descent toward Lamezia Terme, the flight crew confronted a sudden and severe failure of Engine No. 1. At Flight Level 250, the pilots promptly declared a Mayday and initiated emergency protocols, adhering to the standard “Engine Fire/Failure” and “Engine Secure” checklists. To ensure the aircraft’s stability and reduce weight, the crew entered a holding pattern while preparing for an emergency landing. Despite the critical nature of the engine failure, the pilots maintained full control of the aircraft and successfully landed on Runway 28 at Lamezia Terme at 09:52 CET. Emergency services were immediately on hand, and all passengers disembarked safely via mobile stairs. There were no reported injuries or additional damage to the aircraft. Nature and Implications of the Engine Failure Preliminary investigations and visual assessments confirm that the incident involved an uncontained engine failure, a rare and serious event in which engine components breach the protective casing. Post-landing photographs reveal significant damage to the engine cowling, consistent with this diagnosis. The affected engine, a CFM56-5B, is a common powerplant for Airbus A320 aircraft. Uncontained engine failures carry substantial risks, as high-velocity debris can compromise the aircraft’s fuselage or critical systems. The Italian National Agency for the Safety of Flight (ANSV) has launched a comprehensive investigation, with technical evaluations and engine replacement currently underway. Industry Impact and Ongoing Investigation This incident has intensified scrutiny from aviation authorities and raised passenger concerns regarding the safety of the Airbus A320 model. The aircraft has recently faced challenges, including a software recall and quality issues related to metal panels, which have already unsettled investors. This latest event may further affect market confidence, potentially exerting downward pressure on Airbus stock as questions about the reliability of its best-selling aircraft persist. Competitors are also responding to the situation. Boeing may leverage the opportunity to highlight the safety record of its 737 model, while airlines operating A320s are expected to accelerate maintenance inspections on similar engines. The aviation industry is closely monitoring the investigation’s findings, as any conclusions could have significant ramifications for fleet operations and manufacturer reputations. The ANSV continues its detailed examination of the technical causes behind the failure. EasyJet has affirmed that passenger safety remains its highest priority and is cooperating fully with the authorities. Further updates are anticipated as the investigation progresses, including potential recommendations for operators of similar aircraft.

TEI Secures $2.95 Billion in Aviation Engine Export Orders Turkish Aerospace Industries (TAI) subsidiary TUSAS Engine Industries (TEI) has secured $2.95 billion in new export contracts for aviation engine components and maintenance services. These orders encompass 22 different engine programs utilized across both civil and military aviation sectors worldwide. The announcement was made by Haluk Gorgun, President of the Turkish Defense Industry Agency (SSB), who confirmed that deliveries under these agreements are scheduled to commence in 2026. Significance of the Deal and Industry Impact Gorgun emphasized the importance of the contracts, noting that they cover parts production and repair services for a broad range of globally deployed engine programs. With this latest influx of orders, TEI’s total backlog has now reached $8.2 billion. He described the achievement as a clear reflection of TEI’s advanced engineering capabilities, disciplined production processes, and established reliability in the aviation engine market. Furthermore, Gorgun highlighted that the $2.95 billion order reinforces Türkiye’s emerging role as a hub for high-value-added engine manufacturing technologies. The success of TEI and the broader Turkish aviation sector has been attributed to sustained government policies and strategic support. Gorgun credited President Recep Tayyip Erdogan’s comprehensive approach to the defense and aviation industries, which combines determined support mechanisms with an export-oriented strategy. This framework, he stated, has enabled the sector to develop cutting-edge technology, compete on a global scale, and achieve steady growth. TAI General Manager Dr. Mehmet Demiroglu also praised TEI’s accomplishment, describing the export win as a testament to the company’s quality and technical expertise. He expressed optimism about the future, anticipating that 2026 will be a pivotal year for breakthroughs in both defense and civil aviation. Demiroglu extended his gratitude to the SSB Presidency and TEI’s engineers, technicians, and staff for their contributions to this success. Competitive Landscape and Market Outlook TEI’s achievement arrives amid intensifying competition within the global aviation engine industry. Established players such as Pratt & Whitney and GE Aerospace continue to consolidate their market positions. Pratt & Whitney is advancing next-generation engine programs, while GE Aerospace is experiencing record demand for commercial jet engines and aftermarket services. Both companies have recently secured substantial new orders, signaling a competitive environment that may lead to pricing pressures and accelerated innovation. Market analysts suggest that TEI’s export success could prompt competitors to increase production capacity and invest further in technological development to protect their market shares. As the industry evolves, TEI’s ability to fulfill its new contracts and sustain growth will be closely monitored. With deliveries set to begin in 2026, TEI’s latest export orders represent a significant milestone for Türkiye’s aviation sector, highlighting its expanding capabilities and the challenges it faces within a highly competitive international market.

American Airlines Advances Artificial Intelligence Integration Amid Industry Evolution Last year, American Airlines CEO Robert Isom expressed reservations about employing artificial intelligence for fare pricing. Nevertheless, the airline is actively incorporating AI across various facets of its operations. In a recent interview with Skift, Sam Liyanage, American Airlines’ vice president of digital customer experience, outlined the company’s strategic deployment of AI, particularly in enhancing customer engagement and optimizing operational logistics. Enhancing Customer Experience Through AI Liyanage emphasized the airline’s use of generative AI to assist travelers in selecting destinations. He noted a shift in travel search behavior from rigid filters to more natural, conversational queries. The airline’s AI-powered search tool enables customers to input highly specific requests, such as “somewhere warm under $800.” Early data indicates that users are increasingly posing complex, personalized questions that integrate factors like budget, loyalty status, timing, and desired experiences into a single prompt. The AI then synthesizes these elements into clear, actionable options, fostering deeper engagement with search results. Although Liyanage did not reveal the proportion of customers utilizing the AI-based search tool compared to traditional methods, he stressed that the technology is facilitating a more nuanced and satisfying search experience. Operational Efficiency and Industry Context Beyond customer interaction, AI is playing an expanding role in American Airlines’ flight scheduling and logistics. Liyanage explained that the system now analyzes live operational data—including weather conditions, taxi times, and gate availability—to enable rapid, informed decisions aimed at safeguarding the customer journey. This real-time analysis is intended to enhance operational efficiency and reduce disruptions, potentially improving overall customer satisfaction. American Airlines’ AI initiatives coincide with a broader industry focus on artificial intelligence, driven by high-profile IPOs from companies such as SpaceX, Anthropic, and OpenAI. These developments have spurred increased investment in AI technologies across multiple sectors, including aviation. However, the airline faces challenges as it scales its AI efforts. Market volatility is anticipated to rise in 2026 due to divisions within the Federal Reserve and fluctuating economic indicators, factors that could affect investor confidence. Additionally, market sensitivity to unexpected policy changes remains a concern amid current high valuations. The expected decline in interest rates, coupled with a surge in AI-related spending, may either support or constrain American Airlines’ stock performance, contingent on the company’s ability to manage operational reliability and costs effectively. Competitors are closely monitoring American Airlines’ AI strategy, recognizing that its success could influence wider industry adoption. The impact of these AI-driven transformations on customer satisfaction will become clearer with the release of J.D. Power’s annual North America Airline Satisfaction Survey this May, which is poised to provide valuable insights into traveler responses to American Airlines’ technological advancements.

Ethiopian Airlines Collaborates with Nucore Technologies on Digital Initiatives Strategic Partnership to Enhance Digital Transformation Ethiopian Airlines Group has formalized a strategic partnership with Nucore Technologies aimed at accelerating its digital transformation and enhancing its business-to-business (B2B) distribution capabilities. Announced on January 2, 2025, the agreement will integrate advanced back-office automation, reporting, and analytics tools into Ethiopian Airlines’ Agency Portal. This platform currently serves over 2,000 active customers across more than 100 stations worldwide, providing a critical interface for the airline’s travel partners. Nucore Technologies, recognized for its specialized software solutions catering to travel agencies, online travel agencies (OTAs), aggregators, and corporate clients, will play a pivotal role in upgrading Ethiopian Airlines’ digital infrastructure. The collaboration reflects the airline’s commitment to modernizing its operations, prioritizing B2B services, and advancing the adoption of New Distribution Capability (NDC) standards throughout its partner network. Advancing Distribution and Connectivity Through this partnership, Ethiopian Airlines aims to provide travel partners with seamless access to direct content, ancillary services, and hotel packages via enhanced digital platforms. Bilen Arefaine, Assistant Vice President for Holiday & Digital and Group Chief Information and Communication (GCIC) Sales at Ethiopian Airlines, emphasized the airline’s focus on industry modernization. She noted that the integration will enable travel partners to access NDC-based offers with multiple payment options through the Agency Portal, which also offers round-the-clock commercial and technical support. The incorporation of Nucore’s sophisticated reporting and analytics capabilities is expected to strengthen Ethiopian Airlines’ broader strategy of building a connected, future-ready distribution ecosystem. This initiative aligns with the airline’s Vision 2035 strategic plan, which seeks to position Ethiopian Airlines among the world’s top 20 most competitive aviation groups. The carrier currently operates flights to over 160 domestic and international destinations across five continents, supported by a modern fleet that includes Boeing 737s, 777s, 787s, Airbus A350-900s, A350-1000s, and De Havilland Q400s. As a member of Star Alliance, Ethiopian Airlines has been recognized as Skytrax’s Best Airline in Africa for eight consecutive years. Navigating a Competitive and Evolving Market Ethiopian Airlines’ digital ambitions unfold amid a rapidly evolving and increasingly competitive market environment. Industry analysts anticipate heightened market volatility in 2026, influenced by internal divisions within the U.S. Federal Reserve and extreme market valuations. Within Africa, competitors such as ASKY and TAAG are reportedly developing their own maintenance, repair, and overhaul (MRO) operations to enhance self-sufficiency in fleet servicing, potentially intensifying regional competition. Furthermore, the inflight connectivity market is poised for disruption with the forthcoming launch of Gogo’s low-Earth-orbit Galileo system. Concurrently, the Federal Aviation Administration’s (FAA) anticipated certification of Beta Technologies’ first electric aircraft could further reshape the competitive landscape. Despite these challenges, Ethiopian Airlines continues to pursue a multi-hub strategy through partnerships with carriers including ASKY in Togo, Malawi Airlines, Zambia Airways, and Air Congo. The collaboration with Nucore Technologies is regarded as a critical step in reinforcing the airline’s digital leadership and resilience within a dynamic global aviation sector.

FAA Issues Airworthiness Directive for GE90 Engines Following Discovery of Powder Metal Contamination **Washington, D.C.** – The Federal Aviation Administration (FAA) has issued a critical airworthiness directive (AD) targeting General Electric’s GE90 engines, which power the Boeing 777 fleet. Published on January 2, 2026, the directive addresses a significant manufacturing defect involving iron contamination in powder metal components, a flaw that could precipitate uncontained engine failures. This directive follows an extensive investigation by GE Aerospace, which revealed that certain high-pressure turbine (HPT) disks were manufactured using powder metal material containing iron inclusions. These microscopic impurities compromise the fatigue life of the engine components, heightening the risk of premature fractures that could jeopardize engine integrity. Technical Implications and Safety Concerns The contamination originates from deficiencies in the powder metal manufacturing process. Within the extreme conditions of a jet engine—characterized by high stress and elevated temperatures—these iron inclusions act as focal points for stress concentration, accelerating the initiation and propagation of cracks. Should a turbine disk fracture during flight, the resulting uncontained failure could eject debris beyond the engine casing, posing a severe threat to critical aircraft structures. Although no premature fractures have been reported in GE90 engines to date, the FAA has underscored the necessity of proactive measures. Risk assessments conducted by the agency mandate the removal and replacement of affected disks to ensure continued airworthiness and flight safety. Compliance Requirements and Industry Response Designated as AD 2025-25-07, the directive becomes effective on February 6, 2026, and applies to GE90-90B, GE90-94B, GE90-110B1, and GE90-115B engine models. Operators are required to replace the affected HPT Stage 1 and Stage 2 disks based on specific usage thresholds. The HPT Stage 1 disk must be replaced before reaching 4,650 cycles since new (CSN), with an estimated replacement cost of $932,816 per engine. The HPT Stage 2 disk requires replacement before 11,300 CSN, at an estimated cost of $187,086 per engine. Disks identified with high-risk serial numbers must be removed from service prior to further flight operations. While the FAA estimates that only a limited number of U.S.-registered engines are affected, the directive carries global implications. Major operators such as American Airlines, United Airlines, and FedEx Express have already initiated collaboration with GE Aerospace to phase out the non-compliant components. The directive garnered strong support from Boeing, FedEx, and the Air Line Pilots Association (ALPA) during the public comment period. GE Aerospace has supplemented the directive with Service Bulletins to assist airlines in conducting inspections and managing the replacement process. Market and Regulatory Impact The FAA’s directive has elicited notable responses within the industry and financial markets. Following the announcement, GE Aerospace’s stock experienced a modest after-hours movement on December 12, 2025, as investors balanced the directive’s implications against Citi’s new Buy rating and a $386 price target. This action coincides with heightened regulatory scrutiny, including expanded FAA inspections of CFM LEAP engines in South Asia due to dust-related durability concerns, which may increase maintenance demands amid constrained global aircraft deliveries. Analysts are closely monitoring the 2026 outlook, anticipating elevated maintenance requirements and associated costs for operators. Additionally, the directive aligns with recent U.S. Department of Transportation guidance that exempts airlines from passenger compensation obligations for cancellations or delays resulting from aircraft recalls mandated by airworthiness directives. This policy shift could influence future passenger claims related to operational disruptions. The FAA’s directive on the GE90 engine highlights the aviation industry’s ongoing commitment to manufacturing quality and operational safety, while also reflecting the evolving regulatory and financial environment confronting airlines and manufacturers alike.

Boom Supersonic Repurposes Jet Engines to Power Off-Grid AI Data Centers In response to the surging energy demands of artificial intelligence, Boom Supersonic, a Colorado-based aerospace startup, has embarked on an innovative venture to adapt its jet engine technology for power generation. Originally dedicated to reviving commercial supersonic flight, the company is now addressing a critical challenge faced by AI data centers: the electric grid’s inability to meet the rapidly increasing electricity consumption required to sustain AI workloads. From Supersonic Flight to Ground-Based Power Generation Central to Boom’s new initiative is the Symphony engine, initially developed for the Overture supersonic airliner designed to reduce transatlantic flight times. Recognizing the prolonged delays in securing new grid connections, AI data centers are increasingly turning to off-grid power solutions. Boom’s response is the Superpower turbine, a natural gas-fired, ground-based unit derived from its aviation technology. Each Superpower turbine can generate 42 megawatts—sufficient to power a small city—while maintaining operational efficiency in extreme heat and without the need for water cooling. This approach offers a practical alternative amid the limitations of traditional power sources and the intermittency challenges associated with renewable energy, particularly for the continuous, high-demand nature of AI operations. Boom’s strategy has moved swiftly from concept to commercial application. The company recently secured a significant contract with Crusoe Energy Systems, a firm specializing in modular data centers for AI and cryptocurrency mining. The agreement encompasses 29 Superpower units, delivering a combined capacity of 1.21 gigawatts, supported by a recent $300 million funding round. This development positions Boom as a dual player in both advancing supersonic aviation and providing tailored energy solutions for the technology sector’s most demanding users. Engineering Innovation and Market Challenges Boom’s power generation initiative is deeply rooted in its aerospace expertise. After major engine manufacturers such as GE and Rolls-Royce declined collaboration, Boom independently developed the Symphony engine, employing advanced materials and additive manufacturing techniques to achieve high thrust, reduced noise, and lower emissions. These attributes, optimized for flight, have proven advantageous when adapted for stationary power generation. CEO Blake Scholl has explained that the concept originated from observing AI companies like xAI and OpenAI deploying off-grid power plants using converted jet engines. Boom’s adaptation process involves removing flight-specific components and optimizing the engines for continuous, ground-based operation. Unlike conventional industrial turbines, Superpower units are modular and trailer-mounted, allowing rapid deployment at remote data center locations—a critical benefit given the lengthy grid connection backlogs and regulatory obstacles. Despite its promise, Boom faces significant challenges. The company must contend with established power turbine manufacturers and navigate complex regulatory environments. Extensive testing is necessary to validate the reliability and efficiency of its repurposed engines. Some traditional data center operators remain skeptical about whether jet engine-based power solutions can compete with the cost-effectiveness of conventional energy sources. Additionally, there is concern that Boom’s focus on power generation could divert resources from the development of its Overture airliner, potentially delaying its commercial launch. Meanwhile, competitors in both aerospace and energy sectors may pursue similar technologies to capitalize on this rapidly expanding market. As AI’s electricity consumption continues to escalate—training large language models can require as much power as entire households annually—Boom Supersonic’s cross-industry initiative underscores the urgency and complexity of powering the next generation of digital infrastructure.

Flying Taxis Set to Launch in Florida by Year-End ORLANDO, Fla. — Florida is on the cusp of a transformative shift in transportation as the Florida Department of Transportation (FDOT) advances plans to introduce commercial flying taxi services by the end of 2026. This initiative aims to alleviate chronic congestion on some of the state’s busiest highways, including the heavily trafficked I-4 corridor, by moving commuters from ground to air. A New Era of Urban Mobility The initial phase of Florida’s advanced air mobility network will link airports stretching from Daytona Beach through Orlando to Sarasota, with ambitions for statewide expansion in the future. These flying taxis, known as vertical takeoff and landing aircraft (VTOLs), promise a service akin to ride-hailing apps but with the advantage of bypassing ground traffic entirely. Dr. Bob Thomas, a professor of Aeronautical Science at Embry-Riddle Aeronautical University, highlighted the potential of the technology while acknowledging unresolved challenges. He pointed to ongoing questions regarding Federal Aviation Administration (FAA) approval of vehicle types, pilot certification standards, flight durations, and the choice of propulsion systems—whether electric, combustion, or hybrid. The concept has captured the imagination of many, evoking visions of a futuristic commute reminiscent of popular culture’s Jetsons. Frequent I-4 commuter Margaret Ramirez expressed enthusiasm about the prospect, while others remain skeptical. Jeannette Eberle of Winter Haven voiced concerns about affordability, reflecting a broader hesitation among potential users about the cost-effectiveness of such services in their early stages. Regulatory and Infrastructure Challenges Despite the excitement, the project faces significant regulatory and logistical hurdles. Federal authorities must approve new aircraft models and establish pilot certification protocols, while safety remains a paramount concern. Additionally, the development of essential infrastructure—including dedicated vertiports and sophisticated air traffic management systems—is critical to the network’s success. FDOT is currently finalizing its aerial highway network headquarters in Polk County and plans to commence technology testing ahead of passenger operations. Globally, the flying taxi market is becoming increasingly competitive, with companies such as EHang, Archer, and Joby vying to deploy their air mobility solutions. China has made notable advances in this sector, prompting the U.S. government to introduce a regulatory framework aimed at accelerating the integration of flying taxis into American airspace and preserving the country’s competitive edge. As Florida prepares to launch passenger flights within the year, FDOT remains optimistic about overcoming the remaining obstacles. With infrastructure development underway and regulatory processes progressing, the state is positioning itself at the forefront of this emerging mode of transportation.

ASKY and TAAG Angola Airlines Establish In-House MRO Facilities to Support Fleet Expansion ASKY Airlines and TAAG Angola Airlines are undertaking substantial investments to develop in-house Maintenance, Repair, and Overhaul (MRO) facilities aimed at supporting their expanding fleets and fostering growth within African aviation. These initiatives are intended to enhance operational efficiency, reduce dependence on external maintenance providers, and position both carriers to meet the increasing demand for air travel across the continent. ASKY Airlines’ $100 Million Investment in Lomé MRO Center Headquartered in Lomé, Togo, ASKY Airlines is committing $100 million to establish a cutting-edge MRO facility through a joint venture with Ethiopian Airlines, which holds a minority stake. This new center will primarily serve the West and Central African regions, supporting ASKY’s growing fleet, including anticipated long-haul aircraft such as the Boeing 787. The initial phase of the project will include two hangars dedicated to narrowbody aircraft and component repairs, with plans for future expansion to accommodate widebody aircraft. This facility is expected to transform Lomé into a regional hub for aviation maintenance, providing services not only to ASKY but also to other carriers operating in West and Central Africa. As tourism and business travel increase in the region, the MRO center will be instrumental in ensuring airlines maintain efficient and reliable operations. TAAG Angola Airlines’ Partnership with AVIC for Luanda MRO Facility TAAG Angola Airlines is developing its own MRO facility in Luanda in collaboration with the Aviation Industry Corporation of China (AVIC). The first of three prefabricated hangars is scheduled to become operational by June 2026. This facility will support TAAG’s expanding fleet and address the growing demand for air travel in Southern Africa. By internalizing maintenance operations, TAAG aims to improve turnaround times, enhance operational self-sufficiency, and reduce reliance on external providers. This strategic development aligns with the airline’s preparations for increased international and long-haul operations, while simultaneously strengthening Angola’s aviation infrastructure and contributing to broader regional growth. Challenges and Market Dynamics Despite the promising outlook, both airlines face significant challenges. The substantial initial capital investment required to build and equip MRO facilities, the necessity of recruiting and training skilled personnel, and potential increases in operational costs—compounded by a constrained powerplant market and limited availability of used serviceable materials—pose ongoing risks. Furthermore, some industry stakeholders have expressed skepticism regarding the financial viability of such large-scale projects. Competitors may respond by accelerating their own MRO investments to enhance operational resilience. Nevertheless, ASKY and TAAG remain steadfast in their commitment to these developments, viewing them as critical to securing long-term growth and maintaining competitiveness. Implications for Africa’s Aviation Sector As demand for air travel continues to rise in West and Southern Africa, the establishment of in-house MRO centers by ASKY and TAAG is poised to play a vital role in maintaining fleet health, improving operational efficiency, and reducing costs. These strategic investments not only support the ambitions of the individual airlines but also contribute significantly to the broader advancement of Africa’s aviation industry.

Airbus to Publish Audited 2025 Orders and Delivery Figures on January 12 Airbus has confirmed it will release its audited full-year commercial aircraft orders and delivery data for 2025 on January 12. This announcement reinforces confidence in the company’s recently updated target of delivering approximately 790 aircraft during the year. The European aerospace manufacturer communicated the release date via email, following industry reports indicating that Airbus had already delivered at least 782 jets in 2025. Delivery Targets and Market Expectations The scheduled publication underscores Airbus’s commitment to its previously stated guidance, with no further revisions announced to date. Delivery figures are closely monitored by investors and analysts, given their substantial influence on market sentiment and the company’s financial outlook. Airbus continues to face challenges in maintaining production efficiency and meeting delivery goals, particularly in light of recent production issues. Market analysts have projected deliveries of around 785 aircraft for 2025, making the forthcoming audited data critical in determining whether Airbus meets or surpasses these expectations. Competitive Context and Industry Implications Industry observers are also closely watching how Airbus’s performance compares with that of its primary competitor, Boeing, which led in new aircraft orders as of November 2025. This competitive dynamic is expected to shape strategic decisions for both companies, especially as Airbus remains heavily reliant on its narrowbody aircraft production while striving to regain momentum in the widebody segment. The upcoming data release will offer a comprehensive overview of Airbus’s commercial performance throughout 2025, providing valuable insights into order trends, delivery execution, and the company’s standing within the global aviation market. Market reactions will likely depend on whether the audited figures meet or exceed analyst forecasts and how effectively Airbus addresses ongoing production and supply chain challenges.