United Airlines to Decide Fate of Airbus A350 Order

US Air Force Plans to Double Fleet by 2026 Amid Acquisition Challenges The United States Air Force is advancing an ambitious plan to double its fleet size by 2026, focusing primarily on the acquisition of additional KC-46A aerial refueling tankers. This expansion, however, faces significant operational and legislative obstacles. Persistent engineering flaws in the KC-46A have prompted congressional restrictions on further purchases until these technical issues are fully resolved, complicating the Air Force’s timeline for fleet growth. Legislative and Industry Implications Congressional lawmakers have imposed limits on procurement to ensure that the KC-46A meets required performance standards before additional aircraft are acquired. This legislative scrutiny reflects broader concerns about the program’s viability and the potential impact on other defense priorities. In parallel, there are ongoing efforts to protect other critical aircraft programs, such as the E-7A, from cancellation. Lawmakers are wary that the focus on tanker expansion could divert funding and attention away from these essential platforms. The Air Force’s expansion plans are also drawing close attention from defense contractors and suppliers. The anticipated increase in demand for aircraft and related components is expected to influence supply chain strategies and production priorities across the defense sector. Contractors may need to adjust their operations to accommodate shifting procurement schedules, which could have ripple effects throughout the industry. Inter-Service Competition and Modernization The Air Force’s fleet growth initiative is occurring amid a broader context of modernization and competition within the US military. Other branches are enhancing their own capabilities in response. For instance, the Space Force is reportedly investing in spectrum warfare technologies to strengthen its operational edge, underscoring a trend toward advanced technological development and inter-service rivalry. Despite the technical setbacks and legislative challenges, Air Force officials remain steadfast in their commitment to expanding and modernizing their aerial refueling and support capabilities. They emphasize that these efforts are crucial for maintaining global readiness and operational flexibility. Successfully navigating the current obstacles will be essential not only for the Air Force’s future posture but also for the wider defense industry.

Wisk’s New Era: Sébastien Vigneron Leads the Charge Toward Fully Autonomous eVTOL Flight Wisk Aero’s appointment of Sébastien Vigneron as CEO on May 7, 2025, signals a significant turning point for the company and the broader urban air mobility sector. With former CEO Brian Yutko transitioning to a senior position at Boeing Commercial Airplanes, Wisk is poised to accelerate its efforts toward the certification, commercialization, and operational deployment of fully autonomous, electric vertical take-off and landing (eVTOL) aircraft. Advancing Autonomous Urban Air Mobility Wisk’s overarching mission is to enable safe, everyday flight for everyone by revolutionizing urban transportation. The company aims to alleviate ground traffic congestion through its fully autonomous, all-electric eVTOL aircraft. Central to this vision is the 6th Generation (Gen 6) eVTOL, which Wisk positions as the first viable candidate for Federal Aviation Administration (FAA) type certification of a passenger-carrying autonomous air taxi in the United States. The Gen 6 model features a four-seat cabin with dedicated baggage space, made possible by the absence of a pilot cockpit. It offers an approximate range of 90 miles (144 kilometers) with reserves and cruises at speeds near 120 knots (200–220 km/h). The aircraft is designed for rapid turnaround, with a 15-minute recharge time between flights. Safety remains paramount in Wisk’s design philosophy. The Gen 6 incorporates multiple redundancies and a simplified mechanical architecture with fewer moving parts to enhance reliability. Continuous autonomous monitoring is complemented by human oversight from ground operators, who retain the ability to intervene if necessary. The aircraft employs the Traffic Collision Avoidance System (TCAS), a standard in commercial aviation, and is engineered to eliminate single points of failure. All critical safety functions are computer-controlled, underscoring the company’s commitment to rigorous safety standards. In addition to operational safety, Wisk emphasizes environmental sustainability. Its all-electric propulsion system aims to reduce lifecycle emissions relative to conventional fossil-fuel ground transportation, while also delivering quieter and more efficient flights. The company acknowledges, however, that the overall environmental impact will depend on factors such as electricity grid emissions and supporting infrastructure. Navigating Industry Challenges and Strategic Priorities Vigneron assumes leadership amid a complex and evolving landscape for the eVTOL industry, which faces considerable economic, regulatory, and technical challenges. Recent developments illustrate the sector’s volatility: while some startups have been incorporated into the White House eVTOL pilot program, others, including Supernal, have paused or reassessed their projects in response to uncertain market conditions. Competitors are adopting diverse strategies, ranging from pivoting to alternative business models to remaining in pre-production phases, underscoring the difficulties inherent in achieving certification and sustained commercial operations. Wisk’s roadmap to routine autonomous flight encompasses several critical stages. The company is actively progressing through the FAA type certification process for the Gen 6 aircraft. Concurrently, it is conducting extensive flight testing and prototyping, utilizing advanced simulation tools and “Iron Bird” test rigs to integrate hardware and software systems. The first Gen 6 prototype flights are anticipated in the near future. To enhance airspace integration and operational capabilities, Wisk has acquired SkyGrid, a move that strengthens its digital airspace management and autonomy infrastructure. This acquisition is expected to improve navigation, vertiport connectivity, and overall system coordination, which are essential for scaling autonomous urban air mobility. As Wisk advances under Vigneron’s stewardship, the company must not only meet technical milestones but also navigate the broader uncertainties that characterize the eVTOL industry. The coming years will be critical in determining whether Wisk’s vision of safe, everyday autonomous flight can be realized as a commercial reality within a rapidly evolving aerospace environment.

DTX to Launch Dedicated CFM56 Engine Maintenance Facility in the UAE DTX, a prominent provider of maintenance, repair, and overhaul (MRO) services, has announced plans to open a specialized CFM56 engine maintenance facility at its Sharjah site in the United Arab Emirates. Operations are expected to commence in early 2026, initially focusing on engine hospital visits for the CFM56-5B and CFM56-7B engine families. The company intends to gradually expand the facility’s capabilities to include full overhaul services for the entire legacy CFM engine series. Strategic Expansion into CFM56 Services Hussein Lookmanjee, Chairman of DTX, emphasized that this investment demonstrates the company’s dedication to delivering comprehensive engine solutions across the Middle East and beyond. He highlighted that expanding into CFM56 engine services will enhance DTX’s capacity to address the increasing demand for cost-effective and high-quality engine maintenance in the region. This strategic move positions DTX to better serve airlines seeking to optimize fleet performance while managing operational costs. The new facility is expected to strengthen the company’s competitive standing in a market that is witnessing growing demand for reliable engine maintenance solutions. Competitive Landscape and Industry Implications DTX’s entry into the CFM56 engine maintenance sector occurs amid intensifying competition in the Middle Eastern and broader Asia-Pacific markets. Established players such as ST Engineering have recently expanded their engine MRO capabilities in Singapore, raising the stakes for service providers in the region. As DTX advances its plans, it will be subject to close scrutiny from airlines and regulatory authorities, who will assess compliance with rigorous safety and operational standards. Industry analysts suggest that DTX’s expansion may trigger competitive responses from other MRO providers, including ST Engineering and regional operators, who might seek to enhance their service portfolios or expand their facilities to protect market share. This development reflects the broader trend of airlines prioritizing dependable and cost-efficient engine maintenance as a critical component of fleet management strategies. By launching its dedicated CFM56 engine shop, DTX aims to establish itself as a significant player within the Middle Eastern MRO sector, offering expanded technical capabilities to meet evolving customer requirements in a dynamic and competitive environment.

Punjab Company Secures Design Approval for Indigenous 5-Seater Air Taxi In a significant development for India’s aviation industry and the government’s Atmanirbhar Bharat initiative, Punjab-based Nalwa Aero has obtained design approval for its indigenous five-seater electric air taxi. Engineered to reach speeds of up to 350 km/h and cover distances of 300 km, the aircraft is intended for both intra-city and inter-city travel. Additionally, it can be adapted for use as an air ambulance, offering the potential to revolutionize emergency medical response across the country. Pioneering Approval and Future Ambitions Nalwa Aero has become the first Indian company to receive Design Organisation Approval (DOA) from the Directorate General of Civil Aviation (DGCA) for an electric Vertical Take-Off and Landing (eVTOL) aircraft with a seating capacity of five or more. The certificate was formally presented to CEO Kuljeet Sandhu by Civil Aviation Minister Kinjarapu Rammohan Naidu during the recent North India Aviation Summit. Sandhu emphasized that the approval not only validates the company’s technical expertise but also underscores its commitment to advancing urban air mobility in India. He outlined ambitious plans to operationalize eVTOL services by 2028, aiming to provide cleaner, faster, and safer transportation options that align with national sustainability and innovation objectives. Nalwa Aero intends to launch its air taxi service initially in the Delhi-NCR region, with fares starting at Rs 200, positioning the service as an affordable and accessible mode of air travel. Sandhu also highlighted the broader societal benefits, noting that nearly 500 lives are lost daily on Indian highways due to delays in medical assistance. The company envisions its eVTOL aircraft playing a critical role as air ambulances, facilitating rapid medical transport and potentially saving numerous lives. Challenges and Industry Outlook Despite this milestone, the commercialization of urban air mobility in India faces considerable challenges. The sector must navigate complex regulatory frameworks, substantial development costs, and operational intricacies unique to eVTOL technology. While Nalwa Aero’s achievement has generated enthusiasm, industry experts remain cautious about the economic viability and technological readiness of such projects. Market responses have been mixed, balancing optimism for innovation with concerns regarding scalability and long-term sustainability. Competitors within the sector are closely monitoring Nalwa Aero’s progress. Some may accelerate their research and development efforts, while others might shift focus toward more commercially viable segments in light of the prevailing economic and regulatory environment. The success of Nalwa Aero’s initiative could establish a benchmark for the industry, but it will require overcoming a multifaceted array of technical, financial, and policy challenges. As India advances toward embracing advanced air mobility, Nalwa Aero’s design approval represents a pivotal step. The coming years will be critical in determining whether the vision of affordable, accessible, and life-saving air taxi services can be fully realized within the country’s rapidly evolving aviation landscape.

Honeywell Introduces New Engine for Unmanned Military Aircraft Advanced Propulsion for Emerging Military Needs At the 2025 Air, Space & Cyber Conference in Washington, D.C., Honeywell unveiled the HON1600, a new small-thrust-class engine tailored for the collaborative combat aircraft (CCA) and unmanned aircraft system (UAS) markets. This launch arrives amid intensifying global competition in military propulsion, as established industry leaders and emerging players alike strive to secure technological dominance. The HON1600 is engineered to meet rigorous mission demands, delivering robust G-level performance, the capability to engage maneuvering targets, and operational functionality at altitudes reaching 40,000 feet. Designed to support the U.S. Air Force’s CCA program—which focuses on advancing autonomous and manned-unmanned teaming concepts—the engine emphasizes rapid development and deployment. Honeywell has incorporated additive manufacturing alongside high-volume production techniques such as metal injection molding to facilitate a swift transition “from model to metal,” thereby enhancing production speed and supply chain resilience. Dave Marinick, president of Engines and Power Systems at Honeywell Aerospace Technologies, highlighted the engine’s design philosophy, stating, “We’ve designed this engine to meet the new generation of CCA and UAS platforms that require unprecedented performance to keep pace with mission demands.” He further noted that the propulsion system integrates proven technology currently in use with the latest advancements in digital modeling and manufacturing, offering military operators a cost-effective and efficient solution. Scalable Architecture and Competitive Market Dynamics The HON1600 features a scalable and flexible architecture capable of supporting both turbojet and turbofan variants, with thrust outputs ranging from 800 to 1,600 pound-force. The core engine has already demonstrated rated thrust performance, and its design allows for further scaling to accommodate evolving operational requirements. Honeywell employs a systems engineering approach enhanced by advanced digital modeling, which accelerates design and build cycles, facilitates seamless integration, and enables more precise evaluation at the air vehicle level. Additionally, the engine family is engineered for long-term storage prior to deployment, addressing logistical considerations. Honeywell’s introduction of the HON1600 occurs against a backdrop of heightened competition in the military aircraft engine sector. Industry leaders such as Pratt & Whitney are concurrently developing advanced engines for unmanned and collaborative combat applications, focusing on accelerated development timelines and cost-effective solutions to maintain market share. Furthermore, South Korea’s recent investments in indigenous jet engine development signal the emergence of new competitors, adding complexity to the competitive landscape. Market analysts suggest that Honeywell’s new engine could stimulate increased demand for advanced propulsion systems across both defense and commercial sectors. As innovation accelerates, established and emerging manufacturers are expected to respond with expedited product development and competitive pricing strategies. Through the HON1600, Honeywell aims to secure a leading position in next-generation propulsion technology, addressing evolving mission requirements amid a rapidly shifting global market.

Prototype of AI-Enabled CA-1 Europa Drone Unveiled in Germany German defense technology startup Helsing has revealed its most ambitious project to date: the CA-1 Europa, an autonomous combat drone designed to operate independently or in coordination with human pilots in future military operations. The full-scale prototype was unveiled at a facility near Munich, marking Helsing’s transition from software development to hardware manufacturing. This milestone follows the company’s rise as Europe’s most valuable defense startup. Advanced AI Capabilities and Operational Flexibility The CA-1 Europa incorporates cutting-edge artificial intelligence that enables real-time decision-making during missions, surpassing the capabilities of conventional remotely piloted drones. The aircraft is capable of solo reconnaissance flights, coordinated swarm operations with other unmanned vehicles, or functioning as a “wingman” alongside manned fighter jets. This versatility extends operational reach while mitigating risks to human pilots. At the unveiling, Helsing co-founder Gundbert Scherf emphasized the transformative impact of AI on defense, highlighting autonomy as a key enabler. Strategic Development and Industry Context Helsing’s development of the Europa accelerated following its acquisition of German light aircraft manufacturer Grob in June. Grob’s expertise in producing lightweight military trainers for 14 nations provides a solid foundation for scaling drone production. The CA-1 Europa, weighing between three and five tonnes, aligns with current wingman drone classifications. However, experts caution that adapting trainer aircraft designs to advanced autonomous combat drones presents significant technical challenges, particularly in integrating sophisticated AI systems and ensuring robust cybersecurity. The announcement arrives amid intensifying global competition in the autonomous military drone sector. The U.S. Air Force has engaged startups such as Anduril alongside established firms like General Atomics to develop its Collaborative Combat Aircraft fleet. Airbus recently introduced a wingman drone concept for the Eurofighter Typhoon, while China continues to showcase advanced AI-driven military systems. Companies like Red Cat and Alibaba, the latter investing heavily in AI, are also accelerating development efforts, potentially reshaping the competitive landscape. Helsing positions the Europa as a cost-effective alternative to traditional fighter jets, promising comparable mission capabilities at a fraction of the cost. Although specific weapons configurations and pricing remain undisclosed, the company confirmed plans to invest hundreds of millions of euros through partnerships with unnamed European manufacturers. Regulatory, Security, and Market Challenges As Helsing prepares for the CA-1 Europa’s first flight test in 2027 and targets military deployment within four years, it faces several critical challenges. Securing regulatory approval, achieving seamless integration of advanced AI, and ensuring cybersecurity resilience will be essential to the drone’s operational success. Market observers are expected to focus on these technological advancements and their implications for future defense contracts. Proven Track Record and Future Ambitions Founded in 2021 with backing from Spotify CEO Daniel Ek, Helsing initially specialized in AI software for defense applications. The company pivoted to drone manufacturing following Russia’s invasion of Ukraine, successfully delivering 2,000 HF-1 drones from a 4,000-unit order. This demonstrated Helsing’s capacity to rapidly scale production and deliver operational impact. With the CA-1 Europa, Helsing aims to redefine the role of artificial intelligence in aerial combat. However, the company must navigate significant technical, regulatory, and competitive hurdles to realize this vision.

Royal Thai Air Force Selects Airbus H225 Helicopters for Search and Rescue and Medical Missions Expansion of Capabilities with New Helicopters The Royal Thai Air Force (RTAF) has signed a contract with Airbus Helicopters to acquire two H225 multi-role helicopters, aimed at enhancing its search and rescue (SAR) and emergency medical services (EMS) capabilities. This procurement reflects the RTAF’s sustained commitment to strengthening national security and improving rapid humanitarian response across Thailand and beyond. Since 2015, the RTAF has operated the H225M variant, deploying these helicopters in diverse roles including combat search and rescue, troop transport, and emergency response missions. The fleet is highly regarded for its operational range, endurance, and reliability under demanding conditions. The addition of two H225 helicopters will enable the air force to allocate dedicated resources to SAR and EMS tasks, thereby improving its capacity to respond swiftly and effectively to crises both domestically and internationally. Partnership and Integration The integration of the new aircraft will be overseen by Thai Aviation Industries (TAI), which continues its established collaboration with Airbus Helicopters. This partnership ensures that local expertise is leveraged during the induction process, maintaining fleet consistency and supporting the growth of Thailand’s aviation sector. The agreement builds upon Airbus’s longstanding relationship with the RTAF, which also includes the use of H135 helicopters for pilot training. Air Chief Marshal Punpakdee Pattanakul, Commander of the RTAF, praised the H225M as “an indispensable asset” over the past decade. He highlighted that the new helicopters will further enhance the air force’s ability to serve the Thai population, particularly in responding to emergencies such as natural disasters and urgent medical evacuations. Challenges and Strategic Implications Despite the benefits, the introduction of the H225 helicopters presents certain challenges. Incorporating new technology into existing operations will require extensive training for personnel, and there is a risk of delays in delivery and achieving full operational readiness. The helicopters are currently scheduled for delivery by 2029, a timeline that may affect the RTAF’s immediate operational capabilities. This contract is anticipated to stimulate increased market interest in Airbus’s H225 model, potentially prompting competitors such as Sikorsky and Bell to enhance their offerings or focus on existing regional contracts. The acquisition forms part of a broader initiative to modernize Thailand’s air mobility assets, ensuring the RTAF remains well-equipped to meet both defense and humanitarian demands. Building on a decade of collaboration between Airbus and the RTAF, this latest agreement represents a significant advancement in Thailand’s ability to respond to emergencies and uphold national security, while simultaneously fostering the development of the country’s aviation industry.

The Role of SBOMs in Aerospace and Defense Software Security Satellites, spacecraft, and defense systems increasingly rely on complex software ecosystems that integrate open-source, third-party, and legacy components. Recent cybersecurity incidents have highlighted the critical need to track, secure, and manage these intricate software supply chains to safeguard mission-critical operations. Vulnerabilities in Third-Party Components At Black Hat 2025, researchers revealed significant vulnerabilities in widely used satellite control platforms, including Yamcs, OpenC3 Cosmos, and NASA’s cFS Aquila. These security flaws ranged from remote code execution and denial of service to weak encryption and the potential manipulation of satellite operations. In some instances, attackers could alter orbital trajectories or exfiltrate cryptographic keys without detection. Even trusted encryption libraries such as NASA’s CryptoLib were found to harbor critical vulnerabilities, exposing systems to risks including software crashes, security state resets, and compromised communications. These findings underscore a persistent challenge within aerospace and defense software: third-party components remain among the most accessible and exploited targets for cyber attackers. Enhancing Security Through SBOMs A Software Bill of Materials (SBOM) offers a comprehensive inventory of all software components within a system, serving as a foundational tool for identifying vulnerabilities, managing risk, ensuring regulatory compliance, and supporting incident response efforts. However, the utility of SBOMs depends heavily on their accuracy, completeness, and the governance frameworks that oversee their use. Implementing SBOMs within aerospace and defense supply chains presents considerable challenges. The inherent complexity of these systems, coupled with the necessity to comply with diverse international regulations, complicates integration efforts. Organizations must also contend with the vast volumes of data generated by SBOMs, necessitating centralized processes for validation, enrichment, and continuous monitoring. Both upstream (development phase) and downstream (deployed systems) SBOMs require consistent validation and proactive management to maintain robust security postures. Addressing Supply Chain Gaps with Advanced SBOM Platforms Modern SBOM platforms, such as those developed by Keysight, employ advanced methodologies including binary similarity analysis and code emulation to identify software components even when source information is incomplete or unavailable. This capability enables organizations to generate reliable SBOMs across firmware, software, and container images, ensuring comprehensive tracking of all components regardless of their form. Achieving full visibility, rigorous validation, and operational governance is essential for detecting vulnerabilities, enabling rapid incident response, and fostering trust throughout the software supply chain. These measures are vital to closing critical security gaps and protecting mission-critical aerospace and defense systems from evolving cyber threats. Industry Response and Market Developments Despite the complexities involved, the aerospace and defense sectors are increasingly embracing SBOM adoption. The market has witnessed growing investment in SBOM solutions, driven by expectations of enhanced cybersecurity and greater transparency. Industry competitors are developing proprietary SBOM tools and collaborating with international agencies to establish unified standards aimed at addressing compliance and interoperability challenges. Although recent guidelines for SBOM implementation have elicited mixed reactions, the momentum toward adoption continues to accelerate. The expanding recognition of SBOMs’ role in strengthening security and supply chain resilience is influencing industry practices and setting new benchmarks for software assurance within aerospace and defense.

Magma Aviation Expands B747F Fleet with New Aircraft Strengthening Capacity Amid Market Challenges Magma Aviation has announced the addition of a new Boeing 747 Freighter (B747F) to its fleet, marking a significant step in its global expansion strategy. The move, revealed at the outset of the final quarter of 2025, aims to enhance the company’s cargo capacity and broaden its service network in an increasingly competitive air freight market. This latest acquisition underscores Magma’s commitment to diversifying its offerings and meeting growing client demands. Peter Kerins, CEO of Magma Aviation, highlighted the strategic importance of the new aircraft, stating that the expanded fleet will not only support existing customers but also enable the company to explore new routes and service opportunities. He emphasized that this fleet growth is part of a long-term plan designed to substantially increase Magma’s operational reach over the coming years. The Boeing 747 Freighter remains a vital asset for Magma, valued for its ability to carry over 100 tons of cargo per flight, including outsized and specialized freight such as mining machinery, helicopters, and boats. Kerins noted that the addition of the new B747F will provide the company with greater flexibility to diversify its product offerings and better serve a range of cargo requirements. Navigating Industry Dynamics and Future Growth Magma’s expansion occurs against a backdrop of intensified competition and shifting market conditions. Several airlines are modernizing their fleets with more fuel-efficient models, such as Austrian Airlines’ adoption of the A320neo family, while others, including Kenya Airways, face operational and financial challenges. These developments highlight the broader pressures within the air cargo sector and the critical need for strategic fleet management. Acknowledging these challenges, Kerins stressed the importance of a cautious and controlled approach to fleet growth. He explained that Magma’s operations team has thoroughly prepared for the integration of the new aircraft, ensuring that all standard operating procedures, service agreements, and route planning are firmly established. This preparation is supported by a bespoke planning system designed to optimize operational efficiency. Looking forward, Magma Aviation aims to triple its fleet size by 2030, incorporating a balanced mix of wide-body aircraft such as the Boeing 777 Freighter alongside additional B747Fs. The company’s ability to adapt to evolving market conditions and respond effectively to competitor strategies will be essential as it seeks to strengthen its position in the global air cargo industry. As the sector continues to evolve, Magma’s focus on operational excellence and strategic expansion positions it to address both current and emerging demands, while managing the complexities of a rapidly changing aviation environment.

Glasgow Prestwick Strengthens Ties with Air China Cargo Delegation Glasgow Prestwick Airport (PIK) recently hosted a senior delegation from Air China Cargo for a three-day visit aimed at enhancing collaboration and shaping the future of Scottish exports. The high-level meetings provided the airline with direct insight into Scotland’s key export sectors, notably whisky and seafood, while deepening understanding of the requirements of local producers and freight forwarders. Ian Forgie, Chief Executive Officer of Glasgow Prestwick Airport, emphasized the strategic importance of the visit, stating, “Prestwick Airport serves as a gateway for the UK’s exports, and this visit marks an important step in strengthening the links between our airline partners and the businesses that rely on them. By bringing industry leaders together, we are helping to ensure that our export operations are designed with their priorities at the heart.” Engagement with Key Industry Stakeholders Throughout the visit, the airport facilitated a series of discussions, networking sessions, and guided tours involving stakeholders from the whisky, aquaculture, and freight forwarding sectors. The Air China Cargo delegation was given the opportunity to experience Prestwick’s capabilities as a freight hub, including its seamless connectivity, proven handling expertise, and comprehensive in-house services ranging from cargo handling to aircraft fuelling. This engagement underscores Prestwick’s ambition to expand its role in international trade. The airport is actively seeking to attract new cargo routes, although it faces logistical challenges amid competition from more established UK cargo hubs. The visit is expected to influence market dynamics, potentially increasing cargo traffic and necessitating operational adjustments at Prestwick. In response, rival airports may pursue strategic partnerships or enhance their service offerings to maintain their market positions. Commitment to Growth and Future Initiatives Despite these challenges, Glasgow Prestwick remains dedicated to supporting Scotland’s economy by collaborating closely with partners to unlock new opportunities for growth and innovation in air cargo services. The airport’s efforts to attract major international carriers highlight its ambition to become a leading gateway for Scottish exports. Looking ahead, Prestwick plans to build on these relationships. In October, the airport will host a similar event, welcoming a senior delegation from airline partner China Southern Air Logistics, further reinforcing its commitment to fostering global trade connections.