Expleo and Deutsche Aircraft Sign Cooperation Agreement

ALPA India to Participate in AAIB Talks on Aviation Safety and AI 171 Crash Investigation The Airline Pilots' Association of India (ALPA India) has been formally invited by the Director General of the Aircraft Accident Investigation Bureau (AAIB) to join a crucial consultation meeting in New Delhi. Scheduled for Friday, the meeting will explore ALPA India’s potential role as Subject Matter Experts (SMEs) in accident investigations, with a particular focus on the ongoing inquiry into the Air India Flight AI 171 crash that occurred in Ahmedabad this past June. ALPA India’s Role and Response ALPA India has welcomed the invitation, underscoring the value of incorporating pilot expertise into the investigative process. The association highlighted that the invitation reflects recognition of its professional knowledge, operational experience, and enduring commitment to enhancing aviation safety in India. ALPA India expressed confidence that its involvement would strengthen investigative procedures and contribute to improving overall aviation safety standards. The AI 171 Crash and Investigation Challenges On June 12, Air India Flight AI 171, a Boeing 787-8 Dreamliner flying from Ahmedabad to London Gatwick, crashed within a minute of takeoff in the densely populated Meghani Nagar area. The disaster claimed 260 lives, with only one survivor among the 242 passengers and crew on board. The tragedy has intensified scrutiny of aviation safety protocols and the effectiveness of current investigative mechanisms. The investigation has encountered significant criticism and legal challenges. The Federation of Indian Pilots (FIP) recently demanded a judicial inquiry, accusing the AAIB of compromising the integrity, impartiality, and legality of the ongoing probe. The AAIB’s preliminary report, published in July, revealed that both engines were switched from “run” to “cutoff” in rapid succession, severing fuel supply and precipitating the crash. Cockpit voice recordings indicated confusion among the pilots regarding the engine shutdowns, with one pilot denying responsibility for the action. Complicating the investigation further are allegations of negligence directed at Boeing, the aircraft manufacturer, and Honeywell, the avionics supplier. Addressing these concerns while ensuring comprehensive safety protocols remains a formidable challenge for all stakeholders, including ALPA India. The association’s participation is anticipated to advocate for a thorough and impartial investigative process. Broader Implications for Aviation Safety and Industry The AI 171 crash has also triggered market reactions, prompting heightened scrutiny of aviation safety standards and influencing investor confidence in airlines and manufacturers. Competitors within the aviation sector are responding by reinforcing their safety measures and, in some cases, lobbying for stricter regulatory oversight. As legal proceedings and criticism of the initial investigation persist, ALPA India’s involvement in the AAIB consultation is viewed as a constructive step toward restoring trust in the investigative process and advancing aviation safety protocols across the industry.

Joby Aviation Shares Surge Following Key Deals and FAA Support Joby Aviation (NYSE: JOBY) experienced a notable increase in its share price on October 2, 2025, rising approximately 5.5% to $17.10. This gain extends a remarkable rally that has seen the stock more than triple over the past year. The company’s 52-week trading range, spanning from $4.80 to $20.94, underscores growing investor confidence fueled by a series of strategic partnerships and significant regulatory developments. Strategic Partnerships and Global Expansion In August 2025, Joby Aviation announced two pivotal agreements that have bolstered its market position. The company agreed to acquire Blade Air Mobility’s passenger business for up to $125 million, securing immediate access to Blade’s ground infrastructure, including terminals. Concurrently, Joby entered into a partnership with L3Harris to develop a defense-grade hybrid electric vertical takeoff and landing (eVTOL) aircraft, marking its entry into the defense sector and diversifying its revenue streams. Joby has also accelerated its international expansion efforts. In late September, the company showcased its eVTOL aircraft during a public demonstration flight at Japan’s Expo 2025, collaborating with ANA Holdings. Furthermore, Joby signed an agreement with Ras Al Khaimah and Skyports in the United Arab Emirates to launch air taxi services by 2027. These initiatives position Joby strategically for entry into key global markets such as Tokyo and Dubai. Financial Performance and Market Sentiment Despite these strategic advances, Joby’s financial performance remains characteristic of an early-stage company. In the second quarter of 2025, the company reported minimal revenue of approximately $20,000, alongside an earnings-per-share loss of $0.41 and a net loss nearing $325 million. Joby concluded the quarter with $991 million in cash reserves and anticipates a full-year cash burn between $500 million and $540 million. Analyst sentiment toward Joby remains measured. The consensus rating stands at “Hold,” with an average price target of around $10.50, significantly below current trading levels. Price targets vary widely, ranging from $7 by JPMorgan to $17 by Canaccord, reflecting a spectrum of market perspectives. Among analysts, there is one buy recommendation, four holds, and one sell. Competitive and Regulatory Environment Joby’s recent stock surge occurs amid intensifying competition within the eVTOL sector. Competitors such as Archer Aviation and Beta Technologies are advancing rapidly, with all three companies participating in the White House’s eVTOL Integration Pilot Program. Archer Aviation, for instance, has partnered with United Airlines to conduct supervised trial flights of its Midnight aircraft. The regulatory landscape remains complex but increasingly supportive. The U.S. Federal Aviation Administration (FAA) launched an Advanced Air Mobility (AAM) pilot program in September 2025, signaling enhanced government backing for the sector. The FAA is also pursuing regulatory simplification efforts, including revisions to foreign shop drug testing rules and expanded lightning protection requirements for Boeing 777 aircraft. In Japan, the Civil Aviation Bureau (JCAB) is actively developing regulations to facilitate Joby’s commercial flight operations. Industry Outlook The global eVTOL and air mobility market is projected to expand substantially over the coming decades. Industry estimates, such as those from Eve Air Mobility, suggest passenger revenue could reach $280 billion by 2045. With increasing government support and a wave of strategic partnerships, Joby and its competitors are vying to capture a significant share of this rapidly evolving market, even as they navigate ongoing regulatory and financial challenges.

Two Amazon Delivery Drones Collide with Crane in Arizona Incident Overview and Immediate Response On the morning of Wednesday, October 1, two Amazon delivery drones collided with a construction crane in Tolleson, Arizona, resulting in both drones crashing into separate parking lots near a local business park. The drones, each traveling northeast, struck the crane within minutes of each other, approximately two miles from Amazon’s drone launch site in Tolleson. Local authorities confirmed that no injuries were reported in connection with the incident. In response to the crashes, Amazon temporarily suspended its drone delivery service in the Tolleson area as a precautionary measure. The service, which commenced operations in the region last November, had previously been paused in January to implement safety upgrades. The Federal Aviation Administration (FAA) issued a statement confirming the collision of two MK30 drones with the crane’s boom and announced that it would investigate the incident. The National Transportation Safety Board (NTSB) is also conducting an investigation, according to Tolleson police. This event marks the first reported crash involving Amazon’s drone delivery service in the area. Implications for Drone Delivery Services and Industry Response Amazon’s MK30 drones, each weighing nearly 80 pounds, are engineered for lightweight deliveries and are currently deployed in select locations across the United States. The recent collision underscores the ongoing challenges faced by the drone delivery sector, including regulatory scrutiny, safety concerns, and technical obstacles. Industry analysts suggest that such incidents may prompt heightened regulatory oversight and could potentially delay Amazon’s broader plans for expanding its drone delivery network. The FAA’s proposed Part 108 rules, designed to facilitate beyond-visual-line-of-sight drone operations, may also be subject to increased examination in light of this crash. Competitors in the drone delivery market are closely observing these developments. Companies such as Uber, which is collaborating with Flytrex to pilot drone deliveries for Uber Eats, along with ZenaTech, AeroVironment, and AgEagle Aerial Systems, are actively expanding their own drone logistics initiatives. The Tolleson incident may lead these firms to intensify their focus on safety protocols and regulatory compliance as the drone delivery market continues to evolve. Tolleson police have emphasized that this is the first incident of its kind since the launch of Amazon’s drone delivery service in the city. Both federal and local investigations remain ongoing as Amazon reviews its safety procedures and the industry assesses the broader implications for the future of drone-based deliveries.

Datavault AI and Korea Aerospace University Sign MOU to Advance Digital Credentialing and Aerospace Innovation Datavault AI (NASDAQ: DVLT) has entered into a memorandum of understanding (MOU) with Korea Aerospace University (KAU) to introduce Korea’s first digital credentialing system tailored for the aviation sector. This collaboration will deploy Datavault AI’s VerifyU platform, enabling real-time pilot identity verification alongside simulation aptitude assessments. The initiative represents a significant advancement in modernizing credentialing processes within the country’s aerospace industry. Expanding Horizons: Research and Innovation Collaboration Beyond the implementation of digital credentialing, the partnership extends to joint research efforts focused on cutting-edge technologies such as quantum supercomputing and digital twin applications for aerospace design. Both Datavault AI and KAU aim to foster data-driven innovation in aviation, reinforcing South Korea’s competitive position in the rapidly evolving global aerospace landscape. This agreement builds upon Datavault AI’s recent $150 million supercomputer project, supported by Scilex, and its strategic alliance with IBM WatsonX. These developments position the company to deliver scalable, trusted solutions amid increasing global demand for advanced aviation technologies. Industry Context and Competitive Landscape The MOU arrives amid intensifying competition within the aerospace technology sector. Rival collaborations, including the partnership between Altair and the National Institute for Aviation Research (NIAR) focusing on digital twin technology, present potential challenges. Such competing initiatives may attract industry attention and resources, underscoring the importance for Datavault AI and KAU to clearly demonstrate the distinct value and impact of their joint efforts. Market responses to the MOU are expected to be mixed. While some stakeholders may regard the agreement as a strategic step toward enhancing digital credentialing and fostering innovation, others may express skepticism about its immediate influence on the broader aerospace industry. Competitors are likely to respond by accelerating their own partnerships or advancing proprietary technologies to maintain or expand their market presence. Datavault AI’s Technological Expertise and Strategic Vision Datavault AI specializes in AI-driven asset valuation and monetization within the Web 3.0 ecosystem. Its cloud-based platform serves diverse sectors, including sports, entertainment, biotechnology, education, and healthcare. The company’s technology portfolio features patented spatial and multichannel wireless HD sound transmission, alongside tools designed for secure data perception, valuation, and monetization. Its Information Data Exchange (IDE) facilitates the creation of digital twins and the secure licensing of name, image, and likeness (NIL) by linking physical assets to immutable metadata. Headquartered in Beaverton, Oregon, Datavault AI continues to expand its capabilities in high-performance computing and artificial intelligence. The partnership with Korea Aerospace University represents a strategic initiative to address the evolving demands of the aerospace industry. For further details, visit Datavault AI’s website or consult the full press release.

Yingling Aviation Launches Apprenticeship Program to Address Technician Shortage WICHITA, Kansas — Yingling Aviation has unveiled its Airframe & Powerplant (A&P) Mechanic Apprenticeship Program, a strategic initiative designed to meet the escalating demand for skilled aviation technicians. The program offers comprehensive hands-on training and mentorship, equipping participants with the expertise required to become FAA-certified A&P mechanics. Building a Skilled Workforce for the Future Rodger Renaud, Chief Operating Officer of Yingling Aviation, highlighted the program’s significance in sustaining the industry’s talent pipeline. He stated, “Our industry thrives on talent, and this program is about building a strong pipeline of aviation professionals who will keep Wichita at the forefront as the Air Capital of the World.” Renaud emphasized that the apprenticeship not only supports the company’s growth but also represents an investment in the local community by cultivating experienced professionals to meet the increasing demands of maintenance, repair, and overhaul (MRO) operations. The program was developed under the guidance of Amy Preskitt, Yingling’s Training Manager and an Air Force veteran. Preskitt underscored the dual focus on technical proficiency and personal development, aiming to produce well-rounded aviation professionals capable of excelling in a competitive industry. Addressing Industry Challenges and Competitive Dynamics While the apprenticeship program is poised to alleviate workforce shortages in business aviation maintenance, Yingling Aviation confronts challenges common to the sector, particularly in attracting and retaining qualified candidates amid intensifying competition for skilled technicians. Industry observers have responded positively to Yingling’s proactive approach, viewing the apprenticeship as a timely and effective solution to persistent labor gaps. Yingling’s initiative may also influence competitors to enhance their own training and development programs, potentially intensifying the competition for skilled labor. As demand for experienced MRO professionals continues to grow, such apprenticeship programs are expected to play a pivotal role in shaping the future aviation maintenance workforce. Founded in 1946, Yingling Aviation remains a prominent full-service MRO provider headquartered in Wichita, Kansas. Further details about the apprenticeship program and the company’s services are available at YinglingAviation.com.

FTE Airport Digital Transformation Power List Asia-Pacific 2025 Highlights Leading Airports and Groups Changi Airport Group Leading Digital Innovation Changi Airport Group stands at the forefront of digital transformation within the Asia-Pacific aviation sector. Its Digital Factory, known as DIVA (Digital, Innovation, Ventures and Analytics), spearheads operational advancements and enhances the traveller experience through the development and deployment of cutting-edge digital products and services. Under the guidance of Senior Vice President Jeffrey Loke, DIVA leverages artificial intelligence (AI), data analytics, automation, and immersive technologies to drive meaningful change. Central to Changi’s strategy is the ‘SMART Airport Vision’, which seeks to deliver a seamless, efficient, and personalised journey for passengers. This vision is realised through the integration of AI-powered security screening, self-service and biometric systems that expedite check-in processes, and immersive technologies designed to improve passenger comfort and engagement. Sustainability and user-centric design remain key priorities, reinforcing Changi’s status as a global leader in smart airport development. Changi’s innovation extends throughout the entire traveller journey, employing Extended Reality, Machine Learning, the Internet of Things, and edge computing to engage passengers from pre-arrival to post-departure. The forthcoming Terminal 5, scheduled to open in the mid-2030s, exemplifies this approach. Designed for continuous 24/7 operations, Terminal 5 will incorporate extensive automation and AI capabilities, including an Automated People Mover (APM) network, AI-driven video analytics for intelligent operational management, baggage-handling robots, and a central Integrated Operations Centre (IOC) to facilitate data-driven decision-making. Collaboration forms a critical component of Changi’s digital transformation efforts. The airport group actively participates in the International Aviation Lab, an initiative established by the Civil Aviation Authority of Singapore, which fosters joint exploration and implementation of innovative projects alongside industry partners. Regional Challenges and Competitive Dynamics Despite these advancements, digital transformation across the Asia-Pacific region faces notable challenges. Some airports experience slow progress in adopting digital workplace solutions, often due to a lack of a clear strategic vision that links digital initiatives directly to business outcomes. This issue was underscored in a recent global study by Lenovo. Market responses to new digital initiatives tend to be cautious, with stakeholders demanding clear evidence of tangible benefits before fully embracing change. Competition within the region is intensifying as other airports and aviation groups accelerate their digital strategies. For instance, Thales has recently secured agreements with IndiGo to provide avionics maintenance and digital flight operations tools, reflecting a broader industry trend towards operational efficiency and digital innovation. Meanwhile, airports such as Norwich are focusing on strengthening their European networks and enhancing digital connectivity to accommodate growing demand for Visiting Friends and Relatives (VFR) and leisure travel, thereby raising expectations for passenger experience. The FTE Airport Digital Transformation Power List Asia-Pacific 2025 underscores that leading airports in the region are not only adopting advanced technologies but are also navigating the complexities of organisational change, market expectations, and competitive pressures. Changi Airport Group’s comprehensive approach—combining innovation, collaboration, and a clear vision for the future—positions it as a benchmark for digital transformation in the global aviation industry.

Forced Landing Near Ottawa, Ohio, Attributed to Carburetor Icing A pilot was compelled to execute an emergency landing in a field near Ottawa, Ohio, after experiencing a sudden loss of engine power in his Piper PA-25-250. The incident, which occurred during a flight from Abrams Municipal Airport in Grand Ledge, Michigan, to Pompano Beach Airpark in Florida, is believed to have been caused by carburetor icing. The flight took place shortly after the pilot had acquired the aircraft. Flight Details and Incident Description The pilot reported conducting a thorough preflight inspection with no abnormalities detected and departed with full fuel tanks. Approximately five minutes after takeoff, while encountering intermittent cloud cover, he applied carburetor heat for 30 seconds and noticed significant engine buffeting. Roughly 40 minutes into the flight at an altitude of 6,700 feet mean sea level, the pilot observed a sudden five-inch drop in manifold pressure. He again applied carburetor heat, which resulted in severe buffeting of the aircraft. Over the subsequent 15 minutes, the pilot intermittently engaged the carburetor heat multiple times while closely monitoring engine instruments. At 3:07 p.m., with carburetor heat still activated, the pilot heard a loud bang accompanied by a pronounced shudder. The engine abruptly lost all power, and the propeller ceased responding. Unable to identify a suitable road clear of power lines and traffic, the pilot coordinated with air traffic control and performed a forced landing in a flat cornfield. The aircraft came to rest upright, and the pilot sustained minor injuries but was able to exit the plane unassisted. First responders arrived promptly at the scene. Investigation and Findings Federal Aviation Administration (FAA) inspectors found the aircraft upright with significant damage to the fuselage and wings, though no fire had occurred. The National Transportation Safety Board (NTSB) subsequently conducted a detailed examination. The engine remained securely attached to the firewall, and external inspection revealed no case rupture or oil leakage. Control continuity was verified from the cockpit to the carburetor and propeller. Fuel samples taken from the gascolators contained small amounts of blue-colored fuel and trace gray particulates resembling sand. Spark plugs exhibited normal wear, and internal engine components—including continuity, compression, and valve function—were within normal limits. Both magnetos produced spark, and the carburetor was found to be clean and undamaged. No mechanical anomalies were identified in the engine or fuel system. Implications for Aviation Safety This incident underscores persistent safety concerns related to carburetor icing, particularly under variable weather conditions. The forced landing is anticipated to prompt increased regulatory scrutiny and may intensify calls for enhanced safety protocols within general aviation. Industry experts suggest that such events often raise market awareness and could stimulate demand for improved anti-icing technologies and more comprehensive pilot training programs. Aviation manufacturers and competitors may accelerate the development of advanced safety features aimed at mitigating carburetor icing risks, thereby reassuring both pilots and regulatory authorities. As investigations proceed, the aviation community is expected to focus on both technical innovations and procedural enhancements to reduce the hazards associated with carburetor icing and emergency landings.

Abu Dhabi Aviation Accelerates Digital Transformation with Yonder Partnership Abu Dhabi Aviation, the largest commercial helicopter operator in the Middle East, has embarked on a significant digital transformation by adopting Yonder’s smart documentation platform. This strategic move is central to the company’s efforts to modernize its operations, enhance safety protocols, and improve regulatory compliance. By integrating this advanced technology, Abu Dhabi Aviation aims to solidify its position as a leader in digital innovation within the region’s aviation sector. Modernizing Operations and Enhancing Compliance Under the guidance of CEO Mohamed Saeed Al Remeithi, Abu Dhabi Aviation is transitioning from traditional paper-based documentation to Yonder’s dynamic, aviation-specific platform. The implementation, led by Quality Assurance Director Derrick Bryan Murray, is designed to streamline document management processes, facilitate proactive compliance monitoring, and deliver role-specific content to employees through a secure and user-friendly interface. This digital shift is expected to improve operational agility and reinforce the company’s commitment to safety and regulatory standards. This initiative aligns closely with the broader vision of Abu Dhabi Aviation’s majority shareholder, ADQ Aviation & Aerospace Services LLC, which is focused on developing a comprehensive, world-class aviation and aerospace ecosystem in Abu Dhabi. This ecosystem includes advanced maintenance, repair, and overhaul capabilities, positioning the emirate as a hub for aerospace excellence. Challenges and Industry Implications Despite the promising benefits, the digital transformation presents several challenges. Integrating Yonder’s platform with existing legacy systems, managing the migration of extensive data, and ensuring widespread adoption among staff are critical hurdles that Abu Dhabi Aviation must overcome to fully realize the advantages of this initiative. Industry analysts suggest that Abu Dhabi Aviation’s commitment to digital innovation may attract increased investor interest, reflecting confidence in the company’s strategic direction. Furthermore, this move is likely to prompt competitors in the region to accelerate their own digital transformation efforts, either by adopting similar intelligent documentation solutions or by enhancing their existing digital infrastructures to remain competitive. The partnership between Abu Dhabi Aviation and Yonder exemplifies a broader trend within the aviation industry toward intelligent documentation management systems. These systems are increasingly recognized for their ability to deliver tangible improvements in safety, compliance, and operational efficiency. Through this collaboration, both organizations aim to establish new benchmarks for digital excellence, supporting Abu Dhabi Aviation’s evolution into a fully digital, future-ready operation.

CCC Awarded U.S. Defense Department Contract for Nav-Aids Pressure Test Adapters The Canadian Commercial Corporation (CCC) has secured a contract from the United States Department of Defense (U.S. DoD) to supply pressure test adapters produced by Nav-Aids Ltd., a Montreal-based specialist in avionics testing equipment. These adapters are intended to support U.S. Army maintenance teams working on Black Hawk helicopters, facilitating the safe connection of test instruments, leak detection, pressure stability verification, and comprehensive system health evaluations. Nav-Aids’ Role and Product Capabilities Nav-Aids is internationally recognized for its expertise in pitot-static test adapters and air data accessory kits, serving a diverse clientele across civil, corporate, military, and space aviation sectors. The company’s pressure test adapters are engineered to provide secure, leak-proof connections between aircraft ports or probes and testing devices, ensuring precise readings during maintenance and troubleshooting operations. With a portfolio exceeding 500 aircraft-specific adapters, available individually or as part of integrated testing kits, Nav-Aids also offers extensive technical support and after-sales service, reinforcing its standing as a reliable partner in aviation safety. Contract Facilitation and Industry Context The contract was awarded through CCC’s free U.S. DoD Prime Contractor service, which assists Canadian companies in delivering solutions to the U.S. military. The adapters will be supplied to the U.S. Army Command, responsible for the Active Army, Army Reserve, and Army National Guard, as well as providing support to civil authorities during emergencies. The U.S. Army’s 2024 budget totals US$185.5 billion, with US$15.77 billion earmarked for Research, Development, Test, and Evaluation. This contract win occurs amid intense competition within the defense sector. Prominent firms such as Northrop Grumman recently secured a $972 million contract from the U.S. Air Force for modeling and simulation support, while companies like GovCIO and DroneShield continue to obtain significant defense agreements. This competitive landscape may subject CCC to increased scrutiny regarding its ability to deliver products on schedule and within budget, while also prompting rivals to intensify efforts to expand their market share through pricing strategies or accelerated innovation. As CCC and Nav-Aids proceed with fulfilling the contract for the U.S. Army, the agreement underscores both the opportunities and challenges confronting Canadian defense suppliers in a highly dynamic and closely monitored market.

PBS Velka Bites Celebrates 75 Years and Unveils TJ200 Jet Engine at MSV 2025 in Brno PBS GROUP is set to showcase its latest technological advancement, the PBS TJ200 jet engine, at the International Engineering Fair (MSV) in Brno from October 7 to 10, 2025. This unveiling coincides with the 75th anniversary of the company’s Velka Bites plant, marking a significant milestone in the firm’s history characterized by sustained growth and innovation. The TJ200: A New Benchmark in Jet Engine Technology The centerpiece of PBS Velka Bites’ exhibition at MSV 2025 will be the public debut of the TJ200, the most powerful engine the company has developed to date. Engineered primarily for unmanned aerial vehicles, guided missiles, and defense applications, the TJ200 distinguishes itself through a high power-to-weight ratio, low fuel consumption, and a compact design. Milan Macholán, CEO of PBS Velka Bites, emphasized the global interest in the engine, noting its potential to transform airspace defense capabilities. To accommodate increasing demand, PBS is investing substantially in its Velka Bites facility. This includes the construction of a new production hall valued at nearly one billion Czech crowns and the acquisition of advanced CNC machinery. The company projects a more than 200 percent increase in jet engine production in 2025 compared to the previous year. Strategic Partnerships and Workforce Expansion PBS is also advancing its innovation agenda through strategic collaborations, most notably with Pratt & Whitney. Together, they are developing a new generation of auxiliary power units (APUs) for military and civil aircraft. This partnership forms part of a broader Czech-American industrial cooperation, which has been bolstered by the Czech Republic’s acquisition of F-35 fighter jets. The collaboration is expected to generate approximately 100 new jobs at the Velka Bites site, which currently employs around 780 people, with plans to expand the workforce by over 200 positions. The company highlights its commitment to long-term job security, competitive benefits, and an average salary of CZK 64,589, significantly above the national average. Macholán underscored the demand for technical professionals, engineers, and development specialists, attracted by the opportunity to contribute to internationally significant projects and to reinforce PBS’s standing as a global leader in high-tech aviation. Navigating Global Competition and Expanding International Presence Despite these advances, PBS faces intensifying competition on the global stage. Recent investments by South Korea in military jet engine development signal a new era of technological rivalry, particularly within the defense sector. Industry analysts are closely monitoring how the TJ200’s advanced capabilities will influence market dynamics and prompt competitors to accelerate their propulsion technology programs. PBS is simultaneously expanding its international footprint. In April 2025, the company inaugurated a new plant in Roswell, Georgia, where serial production of the TJ40 and TJ80 engines commenced in September. Investments in the U.S. facility are projected to reach up to $110 million. With significant investments both domestically and abroad, ongoing innovation initiatives, and steady employment growth, PBS Velka Bites is solidifying its position as a key player in the global aviation industry. The company continues to serve as a major regional employer while supporting NATO and allied defense efforts, alongside advancing civil aviation technologies.