Horizon Aircraft Chooses PT6A Engine for Cavorite X7 Jet

NTSB Attributes Colorado Tecnam Crash to Carburetor Icing The National Transportation Safety Board (NTSB) has concluded its investigation into the June 16, 2024, crash involving a Tecnam P2006T near Larkspur, Colorado. The accident, which resulted in serious injuries to both pilots and substantial damage to the aircraft, was attributed to carburetor icing—a preventable condition that has renewed focus on carburetor maintenance and flight operational procedures. Sequence of Events The incident occurred during a training flight involving two pilots: a 28-year-old multi-engine instructor (MEI) with 1,174 total flight hours, including 115 in the Tecnam P2006T, and a 23-year-old pilot with 1,084 hours but only two hours on type. The pair were conducting one-engine-inoperative procedures when the left engine was intentionally shut down. After two unsuccessful restart attempts, the engine was eventually restarted, and the aircraft began its return to Centennial Airport (APA) in Englewood. As the aircraft descended near the airport, the pilots noticed an increasing need for right rudder input to maintain control. Shortly thereafter, the left engine’s rpm and temperature dropped, signaling a loss of power. With the left engine continuing to fail, the instructor diverted toward Perry Park Airport (CO93), located approximately four nautical miles away. When it became clear they could not reach the runway, the pilots attempted an emergency landing on southbound Interstate 25. Witnesses recorded video footage showing the aircraft descending with the left propeller stopped and the right propeller still turning. The left wing struck a road sign before the plane veered to avoid vehicles and ultimately came to rest inverted in a marshy area east of the highway. Investigation Findings The NTSB’s investigation revealed that the carburetor heat levers were found in the OFF position, while the left propeller lever was retarded but not fully feathered. Functional testing of both Rotax 912S3 engines showed no evidence of preimpact mechanical failure. The board determined that weather conditions at the time were conducive to significant carburetor icing at glide power settings. The probable cause was identified as the flight instructor’s failure to apply carburetor heat, which led to a loss of power in the left engine due to carburetor icing. The report underscored the critical importance of using carburetor heat, particularly during low-power operations, to prevent icing. It also noted that the aircraft flight manual advises against engine shutdowns during training unless mandated by regulation, and the manufacturer cautions that repeated in-flight engine shutdowns can cause long-term damage. Broader Implications This accident has prompted renewed discussion within the aviation community regarding carburetor maintenance and operational protocols. The NTSB’s findings may lead to heightened scrutiny of maintenance practices and could influence insurers to increase premiums for small aircraft operators due to perceived elevated risks. In response, industry stakeholders may accelerate the development and adoption of new technologies or procedures aimed at preventing carburetor icing, potentially fostering innovation in anti-icing systems. The NTSB’s safety advisory, “Preventing Carburetor Icing (SA-029),” highlights that serious carburetor ice can form even at temperatures as high as 90°F and relative humidity as low as 35 percent. The Colorado crash serves as a stark reminder of the necessity for vigilance and strict adherence to established procedures, especially during training flights where operational risks are inherently greater.

Joramco Extends Aircraft Maintenance Agreement with TUI Group Joramco, the Amman-based Maintenance, Repair, and Overhaul (MRO) provider, has announced the extension of its aircraft maintenance agreement with TUI Group, reinforcing its position within the global aviation sector. This renewed partnership builds upon previous collaborations and represents a significant milestone for Joramco as it broadens its service offerings and expands its international footprint. Expanded Scope of Services The extended agreement ensures that Joramco will continue delivering base maintenance services for TUI’s Boeing 787 Dreamliner fleet. Importantly, the partnership now encompasses maintenance for the Embraer E190-E2 aircraft, marking a first for Joramco and expanding the range of aircraft models under its care. This development highlights Joramco’s growing technical expertise and strengthens its reputation as a leading MRO provider capable of servicing a diverse fleet. Strategic Advantages and Industry Context Joramco operates from a facility at Queen Alia International Airport, which includes six large hangars capable of accommodating up to 22 aircraft simultaneously. Its strategic location in Amman provides access to key aviation markets across the Middle East, Europe, South Asia, Africa, and the Commonwealth of Independent States (CIS). The company’s operations are certified by major international aviation authorities, including the European Union Aviation Safety Agency (EASA), the Federal Aviation Administration (FAA), and Jordan’s Civil Aviation Regulatory Commission (CARC), ensuring compliance with the highest safety and quality standards. The extension of this agreement occurs amid persistent challenges in the aerospace supply chain, which are expected to cost the global airline industry more than $11 billion this year. These disruptions threaten the timely delivery of parts and materials, presenting operational challenges for MRO providers like Joramco as they assume increased responsibilities. Competitive Landscape and Market Dynamics The deepening collaboration between Joramco and TUI Group underscores the vital role of MRO services in maintaining fleet safety, reliability, and operational efficiency. As airlines worldwide continue to expand their fleets, the demand for expert maintenance providers is rising. In response, competitors are pursuing new strategies, including joint ventures in aircraft leasing and maintenance, as demonstrated by Turkish Airlines’ recent partnership with Air Algerie. Market reactions to such partnerships are influenced by broader financial pressures affecting major industry players. For example, conglomerates like Tata Group have experienced significant market value declines due to various risks, reflecting the volatile environment in which aviation service providers operate. Outlook The extension of Joramco’s agreement with TUI Group not only consolidates its status as a trusted MRO partner for leading international operators but also opens avenues for new business opportunities in a competitive and challenging market. As the aviation sector contends with supply chain disruptions and evolving industry dynamics, Joramco’s dedication to quality, regulatory compliance, and strategic growth positions it well to meet the demands of global airline clients.

Which Oil Will Georgia Use with Unleaded Fuels? As general aviation moves toward a complete transition to unleaded fuels, a critical question arises regarding the type of oil that aircraft in Georgia—and beyond—will employ in their engines. The shift away from leaded fuels presents both challenges and opportunities for the aviation oil industry, particularly in terms of lubricant performance and operational considerations. Historical Context and Challenges with Synthetic Oils Looking back to the early 1970s provides valuable insight into the complexities of aviation oil formulation. At that time, Shell developed a fully synthetic version of its Aeroshell Oil W100 to meet the demand for multi-grade oils in general aviation. Initial flight tests were encouraging, as the synthetic oil effectively addressed issues such as oil cooler congealing. However, after 600 to 1,000 hours of use, test aircraft exhibited a significant increase in oil consumption, dropping from eight hours per quart to as little as one or two hours per quart. Upon inspection, mechanics discovered a gray, epoxy-like residue coating the pistons and ring belts. Analysis identified this substance as primarily lead by-products resulting from combustion. This experience underscored a critical limitation: while full synthetic base stocks provided excellent lubrication, they were poor solvents for lead residues. This finding became widely accepted within the industry, and subsequent attempts by other companies to market full synthetic aviation oils confirmed the same issue. The presence of lead in traditional aviation fuels thus posed a significant barrier to the adoption of fully synthetic oils. Implications of the Transition to Unleaded Fuels The elimination of lead from aviation fuels fundamentally alters the lubrication landscape. Without lead combustion by-products, the primary obstacle that hindered synthetic oils in the past is removed. This development opens the possibility for full synthetic aviation piston engine oils to become the standard lubricant choice. Full synthetic oils offer several performance advantages, including improved cold-weather starting, enhanced protection at high temperatures, extended intervals between oil changes, and superior wear protection. However, these benefits must be balanced against cost considerations, as full synthetic oils are generally more expensive than mineral or semi-synthetic alternatives. Operational realities also influence the decision. Most private aircraft average approximately 100 flight hours annually, with oil changes recommended every 50 hours or four months regardless of oil type. Consequently, the potential for extended oil change intervals may be limited by actual usage patterns rather than oil performance alone. Market and Geopolitical Considerations for Georgia For Georgia’s aviation sector, the choice of oil is further complicated by external market forces. Recent coverage in the Wall Street Journal highlights geopolitical risks that can affect oil prices and supply stability. Investor reactions to these risks vary, with some expressing concern over potential supply disruptions and others anticipating price increases. In this uncertain environment, Georgia’s aviation industry—and its competitors—must prioritize securing reliable oil supplies and managing costs to maintain competitiveness. The transition to unleaded fuels thus presents an opportunity for broader adoption of full synthetic oils in aviation. Yet, the ultimate choice will depend not only on technical performance and cost but also on the ability to navigate market volatility and geopolitical uncertainties. As this transition progresses, Georgia’s aviation community will need to carefully balance these factors to ensure safe, efficient, and economically viable operations.

Cirium Projects $3.4 Trillion in Global Aircraft Deliveries by 2044 Cirium’s latest Fleet Forecast anticipates the delivery of approximately 46,500 new commercial passenger and freighter aircraft worldwide over the next two decades, representing a total market value of $3.4 trillion. This comprehensive analysis, conducted by Cirium Ascend Consultancy, takes into account ongoing industry challenges such as persistent supply chain disruptions, certification delays for new aircraft programs, and geopolitical uncertainties that continue to influence market dynamics. Market Trends and Regional Growth The report indicates a 6% reduction in expected aircraft deliveries over the next seven years compared to last year’s projections, largely attributed to slower-than-expected production increases in single-aisle aircraft. Despite these short-term setbacks, Cirium maintains a positive long-term outlook, forecasting a 1% rise in total deliveries through 2044. Asia is poised to be the primary driver of global fleet expansion, accounting for 45% of all new aircraft deliveries, with China and India leading demand growth in the region. Airbus and Boeing are projected to dominate the market, supplying 85% of all aircraft delivered and representing 92% of the total market value. China’s COMAC is expected to capture 6% of global demand during the forecast period. Currently, single-aisle aircraft constitute 71% of the global fleet, while twin-aisle and regional jets have yet to return to pre-pandemic levels. The global freighter fleet is also forecasted to grow by 41% by 2044, reflecting sustained demand in air cargo. Industry Challenges and Technological Advancements Significant challenges persist within the aviation sector. The International Air Transport Association (IATA) has warned that ongoing supply chain disruptions could cost airlines up to $11 billion in 2025, leading many carriers to reconsider their fleet renewal strategies amid production delays. The competitive landscape remains intense, highlighted by Airbus’s A320 recently surpassing the Boeing 737 as the most-delivered jet in history, underscoring the rivalry between the two manufacturers. Digital transformation is emerging as a critical trend shaping the future of aviation. Airbus projects a fourfold increase in digitally connected aircraft by 2044, as airlines invest heavily in advanced technologies to improve operational efficiency and enhance passenger experience. The business jet market is also expected to approach $40 billion in 2025, with balanced growth anticipated in both preowned and new-production segments. Stephen Burnside, global head of Cirium Ascend Consultancy, emphasized the resilience of the industry, stating, “This year’s Cirium Fleet Forecast shows the global aviation industry is moving forward with confidence despite near-term headwinds. Long-term demand remains robust across every region, airlines continue to invest in fleet renewal, and OEMs continue to incrementally increase their R&D budgets in preparation for the next generation of aircraft families. The next chapter of aviation growth is being defined by the need for supply chain resilience, production capacity right sizing, product and service innovation, and a focus on efficiency.” Focus on Conventional Propulsion and Operational Insights The Fleet Forecast encompasses aircraft with at least 30 seats and their freighter equivalents, excluding electric, hybrid, or hydrogen-powered models. Cirium notes that commercial aircraft development is expected to remain centered on conventional propulsion systems, with an increasing emphasis on sustainable aviation fuel (SAF) as the industry seeks to reduce its environmental impact. Recent operational data from Cirium revealed that North American airlines were the most affected by global IT outages in July 2024, experiencing a 98% surge in cancellations. Europe, Asia Pacific, and North America recorded the highest cancellation rates, while Latin America and the Middle East & Africa were minimally impacted.

Archer Aviation Acquires Lilium’s Air Mobility Patents Archer Aviation has expanded its technological capabilities by acquiring 300 patents from German air-taxi pioneer Lilium for approximately $21 million. This strategic acquisition significantly enhances Archer’s intellectual property portfolio, pushing its total patent count beyond 1,000 and reinforcing its leadership in the competitive electric vertical takeoff and landing (eVTOL) sector. The deal marks a notable development in the rapidly evolving urban air mobility market, where technological innovation and patent ownership are critical competitive advantages. Expanding Technological Capabilities The patents acquired from Lilium encompass key technologies such as high-voltage systems, battery management, and ducted-fan propulsion. These areas are vital for the advancement of safer and more efficient electric aircraft, underscoring Archer’s commitment to developing cutting-edge eVTOL solutions. Lilium, which had invested over $1.5 billion in eVTOL development since 2015, faced insolvency last year, making its intellectual property a valuable asset for competitors seeking to accelerate their own technological progress. Following the announcement of the acquisition, Archer’s shares rose by 8.5%, reflecting investor confidence in the company’s strengthened market position and robust order book. This transaction comes amid ongoing challenges in the sector, including high cash burn rates, slow commercialization timelines, and intensifying competition. Industry observers note that mergers and technology acquisitions are increasingly common as companies vie for dominance in a market that Morgan Stanley projects could reach $1 trillion by 2040. Challenges and Industry Context Despite the promising expansion of its patent portfolio, Archer faces several challenges in integrating Lilium’s technology into its existing operations. Effective assimilation of these patents will require careful management to maximize their value. Additionally, Archer must navigate complex regulatory environments and respond to competitive pressures from rivals such as Joby Aviation and other advanced air mobility firms. These competitors are likely to accelerate their own patent acquisitions, strategic partnerships, and mergers in response to Archer’s latest move. The broader electric air mobility landscape remains dynamic and uncertain. While the U.S. government has introduced initiatives to support next-generation air mobility and accelerate the adoption of air taxis, significant obstacles persist. These include supply chain disruptions, regulatory delays, and the high costs associated with development. Although commercial eVTOL flights are still several years away, the pursuit of environmentally friendly and urban-compatible transportation solutions continues to attract substantial interest from investors and policymakers. As Archer advances its integration of Lilium’s technology and seeks to maintain its momentum, its ability to manage competitive pressures, regulatory complexities, and technological challenges will be pivotal in shaping both its own future and that of urban air transport.

Dubai Airshow 2025 Highlights Innovation and Sustainability in Aviation The Dubai Airshow 2025 is poised to serve as a premier global platform showcasing the latest advancements in aviation, defence, and space, with a pronounced emphasis on innovation and sustainability. Against the backdrop of increasing pressure to decarbonize and navigate a complex geopolitical environment, this year’s event seeks to promote collaboration and resilience among industry leaders, visionaries, and innovators. Advancements in Aviation Technology and Sustainability Key manufacturers including Airbus, Boeing, and Embraer are expected to unveil next-generation aircraft that prioritize fuel efficiency and emissions reduction. Among the highlights are hybrid-electric and hydrogen-powered prototypes, underscoring the sector’s commitment to achieving cleaner skies. Sustainable aviation fuels (SAF) will also feature prominently, with demonstrations and new partnerships aimed at expanding SAF production and integrating it into global airline operations. Digital transformation remains a central theme, with artificial intelligence-driven digital twin technology enabling predictive maintenance, operational optimization, and advanced flight simulation. These innovations are anticipated to enhance safety, efficiency, and cost-effectiveness throughout the aviation industry. Urban Air Mobility and Autonomous Flight Systems The event will also spotlight the emerging field of Urban Air Mobility (UAM), which promises to transform urban transportation. Electric vertical takeoff and landing (eVTOL) vehicles from startups such as Joby, Archer, and Volocopter will be on display, offering scalable solutions for urban air taxis and intra-city logistics. Additionally, advancements in autonomous flight systems and sophisticated traffic management technologies will be presented, supporting the development of a future air mobility ecosystem. Innovations in Space and Defence In the space and defence sectors, attention will focus on reusable launch systems and rapid satellite deployment technologies. Both government agencies and private enterprises are introducing smaller, reusable rockets alongside new models for efficient satellite constellation deployment. Defence exhibitors will emphasize the integration of artificial intelligence and machine learning for early threat detection, autonomous drones, and smart battlefield networks. Commitment to Sustainability and Smart Infrastructure Sustainability remains a foundational element of the Dubai Airshow 2025. The event will showcase carbon-neutral airport design concepts and pilot projects featuring energy-efficient, AI-managed airport infrastructure. Advances in lightweight, durable composite materials are also expected to contribute to improved aircraft efficiency and reduced maintenance costs. Industry Challenges Amid a Shifting Global Landscape The Airshow unfolds amid ongoing geopolitical uncertainties and the pressing need for comprehensive decarbonization across the aviation sector. Organizers and participants are underscoring the importance of resilience and adaptability, recognizing that technological transformation is critical to the industry’s future. Market observers are likely to focus on the event’s strong emphasis on innovation and sustainability, attracting interest from companies and investors prioritizing these domains. As other global events such as the World Aviation Festival 2025 in Lisbon and the Skift Global Forum East 2025 in Dubai also highlight technological progress and sustainability, the Dubai Airshow 2025 aims to reaffirm its status as a leading forum for shaping the future of aviation. Combining cutting-edge technology, sustainability initiatives, and a collaborative spirit, the Airshow invites the world to envision and build a cleaner, smarter, and more resilient future in flight.

Inside All Nippon Airways’ Vision for Autonomous Ramp Operations All Nippon Airways (ANA) is pioneering a transformative approach to ramp operations by integrating advanced autonomous technologies with human collaboration. Central to this initiative is ANA’s participation in the FTE Smart Ramp program, which seeks to revolutionize aircraft turnaround processes through full automation and enhanced efficiency. Innovation and Collaboration at the Forefront Tom Kikuchi, ANA’s Head of Innovation, will present the airline’s vision at the upcoming APEX FTE Asia Expo in Singapore. His presentation, titled “Smart Ramp for the future model of the turnaround operation with autonomous driving vehicles connecting harmoniously with people,” will explore ANA’s innovative strategies and the valuable lessons gained throughout their development journey. Kikuchi acknowledges the complexity of innovating in ground handling, citing the diversity of Ground Support Equipment (GSE) and the demanding nature of ramp workloads as significant challenges. He stresses that successful integration of new technologies requires a profound understanding of existing operations and a willingness to drive change across the industry. The FTE Smart Ramp initiative serves as a catalyst for collaborative progress, with ANA working alongside industry partners to address the multifaceted challenges of ramp turnaround operations. Kikuchi highlights that no single solution fits all scenarios, making cooperation essential, especially as airlines contend with constrained investment budgets and escalating operational demands. Advancements and Challenges in Autonomous Technology A flagship project within ANA’s strategy is the development of an autonomous towing tractor for cargo, slated to commence operations in December 2025. This Proof of Concept (PoC) has involved extensive testing and open collaboration with industry stakeholders, enabling ANA to refine both the technology and its integration with existing ramp infrastructure. Despite these advancements, ANA faces considerable obstacles, particularly in securing regulatory approval. Autonomous vehicles must comply with rigorous safety and operational standards, a process that Kikuchi describes as “a complex undertaking.” The airline is actively engaging with the Japan Civil Aviation Bureau (JCAB) to ensure the technology meets all necessary regulatory requirements. Additionally, integrating autonomous systems with legacy equipment and facilitating seamless interaction between human workers and machines remain significant challenges. Market response to ANA’s initiative has been notable, with competitors expressing growing interest in autonomous solutions and exploring various innovations to enhance operational efficiency and maintain competitiveness. The Human-Machine Synergy Kikuchi remains optimistic about the future, emphasizing that the true value of ANA’s approach lies in the harmonious collaboration between humans and autonomous systems. While automation offers clear benefits in safety, productivity, and sustainability, he asserts that technology alone cannot drive this transformation. Instead, it is the synergy between people and machines that will shape the future of ramp operations. As ANA advances its innovation journey, its experience may provide a valuable blueprint for the wider aviation industry, illustrating how technological progress and human expertise can jointly redefine airport operations for the years ahead.

Delta TechOps Secures Jet2.com Component Care Contract, Expands European Footprint Delta TechOps has reinforced its presence in the European aviation maintenance market by securing a long-term component care agreement with Jet2.com, the United Kingdom’s third-largest airline. Under this contract, Delta TechOps’ maintenance, repair, and overhaul (MRO) team will provide comprehensive mechanical and avionics component services to support the expanding Jet2.com fleet. Strategic Partnership and Industry Context The agreement was announced at MRO Europe, a leading aviation maintenance event held in London from October 14 to 16. This contract represents a significant milestone in Delta TechOps’ European expansion strategy and builds upon an existing relationship initiated in 2023, when the company first began offering component maintenance support to Jet2.com. Basil Papayoti, Vice President of Commercial at Delta TechOps, highlighted the company’s expertise and the trust it has cultivated across Europe. He noted, “With decades of experience supporting diverse fleets, Delta brings deep technical knowledge to the Jet2.com partnership. Our team is focused on delivering dependable maintenance and technical expertise that helps keep Jet2.com aircraft flying safely and efficiently.” The deal arrives amid mounting challenges in the aviation MRO sector, including widespread supply chain disruptions projected to cost airlines over $11 billion by 2025. These pressures have intensified competition among providers, with major players such as Pratt & Whitney investing heavily in supply chain enhancements. As Delta TechOps expands its services for Jet2.com, the evolving market dynamics and competitor strategies are expected to influence the landscape of third-party MRO support across Europe. Commitment to Legacy and Next-Generation Platforms During MRO Europe, Delta TechOps executives engaged in key industry discussions addressing issues such as aging fleets, engine maintenance, and the integration of emerging technologies into MRO operations. Christy Robinson, Director of Engine Maintenance, reaffirmed the company’s dedication to both legacy and next-generation platforms. She stated, “We continue to support a robust portfolio of legacy engine customers while expanding our capabilities for next-generation platforms. We’re not scaling back in our legacy shops—we continue to invest in these shops. We’re bringing legacy forward with us as we industrialize and prepare for the future.” Since launching its third-party MRO services in 2000, Delta TechOps has grown into one of the world’s most respected maintenance providers, serving more than 150 customers across six continents. The new contract with Jet2.com underscores the company’s strategic focus on global reliability, technical depth, and customer-centric service, positioning Delta TechOps to navigate the challenges and opportunities shaping the future of aviation maintenance in Europe.

Abu Dhabi-Backed Flying Taxis Launch Operations in Egypt Abu Dhabi is poised to introduce a pioneering flying taxi service in Cairo, marking a significant advancement in urban air mobility within the region. Air Taxi Egypt, a new enterprise established by Abu Dhabi Aviation—majority-owned by the sovereign wealth fund ADQ—will commence operations at the El Gouna Film Festival this week. The service will initially transport passengers between Cairo and the Red Sea resort town of El Gouna, with ambitions to expand air routes throughout the heavily congested Egyptian capital. Strategic Expansion in Urban Air Mobility This launch forms part of Abu Dhabi’s broader strategy to lead the development of next-generation transportation solutions. Abu Dhabi Aviation is concurrently spearheading a partnership with California-based Archer Aviation to introduce air taxi services in the UAE capital. Complementing this initiative, Cleveland Clinic Abu Dhabi has announced plans to retrofit its helipad to accommodate Archer’s electric vertical take-off and landing (eVTOL) aircraft, reflecting growing institutional endorsement of this emerging technology. Despite the promising outlook, the deployment of flying taxis in Egypt faces several challenges. Regulatory frameworks must evolve to integrate these novel forms of air mobility, requiring close collaboration with aviation authorities. Infrastructure development, including the establishment of vertiports and charging stations, will be critical to support the service’s scalability. Furthermore, market acceptance remains uncertain; while initial public skepticism is anticipated, interest is expected to increase as the service proves its operational reliability and safety. Regional Competition and Broader Implications The competitive environment in urban air mobility is intensifying, with established companies such as Archer and Joby Aviation expanding their regional footprint. This dynamic may lead to strategic partnerships or heightened competition as stakeholders vie for market leadership. The transformative potential of urban air mobility, alongside the economic impact of autonomous taxis, continues to influence industry trends, positioning cities like Cairo and Abu Dhabi as key testing grounds for these innovations. Meanwhile, Dubai is advancing its own urban transportation initiatives by focusing on drone-based delivery services. The emirate’s civil aviation regulator, according to AGBI, is preparing to enter the second phase of a project with Chinese manufacturer Keeta Drone. Scheduled to launch ahead of the Dubai Air Show next month, this initiative aims to expand drone delivery coverage from a limited pilot area to nearly one-third of Dubai by 2026. As the Middle East accelerates efforts to modernize urban transportation, the success of Abu Dhabi-backed flying taxis in Egypt may serve as a critical indicator for the wider adoption of such technologies across the region and beyond.

StandardAero to Support Mauritania Airlines’ Boeing 737 Fleet with Engine Maintenance Expanded Partnership for CFM56-7B and LEAP-1B Engines StandardAero (NYSE: SARO), a prominent independent provider of aerospace engine aftermarket services, has been selected by Mauritania Airlines, the national flag carrier of Mauritania, to provide maintenance, repair, and overhaul (MRO) support for the CFM International CFM56-7B and LEAP-1B engines that power its Boeing 737NG and 737 MAX 8 aircraft. This agreement represents an expansion of the existing collaboration between the two companies, building on StandardAero’s prior support of Mauritania Airlines’ Embraer E175 fleet through auxiliary power unit repairs. StandardAero has already inducted a CFM56-7B engine at its Winnipeg, Manitoba facility and a LEAP-1B engine at its San Antonio, Texas location. Guillaume Limouzy, Airline Sales Director for StandardAero’s Airlines and Fleet business unit, emphasized the company’s commitment to responsive and timely support, particularly for smaller fleet operators, acknowledging the trust Mauritania Airlines has placed in StandardAero’s capabilities. Comprehensive MRO Capabilities and Strategic Facility Expansion As a CFM International-authorized MRO provider for the CFM56-7B engine, StandardAero has delivered comprehensive services from its Winnipeg facility since 2010. The company recently expanded its CFM56-7B maintenance capabilities to its Dallas/Fort Worth International Airport location, adding a second engine line and test cell redundancy to better serve Boeing 737NG operators and asset owners worldwide. Beyond core engine maintenance, StandardAero offers a broad portfolio of services for the CFM56 family, including component repair and overhaul, asset management, and engine health monitoring data analysis. For the next-generation LEAP-1A and LEAP-1B engines, the company operates as a CFM LEAP Premier MRO provider from its 810,000-square-foot San Antonio facility. In March 2023, StandardAero signed the first non-airline CFM Branded Service Agreement (CBSA) in the Americas, further solidifying its position in the LEAP engine aftermarket. The company is also advancing new engine component repairs through its Component Repair Services network and Repair Development Center of Excellence, having industrialized over 350 component repairs to date. Navigating Industry Challenges and Competitive Pressures Supporting Mauritania Airlines’ Boeing 737 fleet presents notable challenges amid ongoing global supply chain disruptions affecting CFM engines. Additionally, recent reliability concerns with LEAP-1B engines, as highlighted by issues encountered by operators such as Ascend Airways, underscore the technical complexities involved in maintaining these advanced powerplants. The competitive environment remains intense, with other MRO providers like ST Engineering expanding their capabilities in key markets such as Singapore to attract airlines operating similar engine types. As StandardAero deepens its partnership with Mauritania Airlines, industry observers will closely monitor how the company manages supply chain constraints and competitive pressures while maintaining the high standards of engine support demanded by its customers.